Preparation of Ultra Fine Particles in Gas Atmoshere
نویسندگان
چکیده
منابع مشابه
Separation of Ultra - Fine Sulphur Particles from Nta Dispersion by Aphron Flotation
Oxidative scrubbing is used to remove H2S from gas streams. A key problem in regeneration of the absorbent is the removal of fine particles of sulphur from the suspension of the scrubbing liquid. Dispersions of ultra-fine bubbles have been called "colloidal gas aphrons" or aphrons for short. These dispersions have interesting properties and it was found that they have particular advantages in t...
متن کاملSYNTHESIS OF ULTRA-FINE PARTICLES OF BAFE12O19 BY CO- PRECIPITATION ROUTE USING CHLORIDE/NITRATE PRECURSORS
Ultra-fine particles of barium hexaferrite have been synthesized by co-precipitation method using barium nitride and iron chloride precursors with a Fe/Ba molar ratio of 11. Co-precipitation was carried out at 25 and 80°C using NaOH as a precipitant. Effect of coprecipitation and annealing temperatures on the phase composition and morphology of the products have been investigated using XRD and ...
متن کاملULTRA FINE FERRITE FORMATION IN Si-Mn TRIP STEELS
Abstract: In the present investigation, the effects of thermomechanical processing parameters and the steel chemical composition on the ultra fine ferrite formation characteristics were studied. This was programmed relying on the capabilities of strain induced transformation (SIT) phenomenon and applying to different grades of Si-Mn TRIP (Transformation Induced Plasticity) steels. According...
متن کاملUltra-Fine Grained Dual-Phase Steels
This paper provides an overview on obtaining low-carbon ultra-fine grained dual-phase steels through rapid intercritical annealing of cold-rolled sheet as improved materials for automotive applications. A laboratory processing route was designed that involves cold-rolling of a tempered martensite structure followed by a second tempering step to produce a fine grained aggregate of ferrite and ca...
متن کاملOptimization of ECMAP parameters in production of ultra-fine grained Al1050 strips using Grey relational analysis
Production of lightweight metals with a higher strength to weight ratio is always the main goal of researchers. In this article, equal channel multi angular pressing (ECMAP) process as one of the most appealing severe plastic deformation (SPD) methods on production of ultra-fine grained (UFG) materials studied. Two main routes A and C investigated by FEM and compared with each other from differ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Colour Material
سال: 1984
ISSN: 0010-180X
DOI: 10.4011/shikizai1937.57.386