منابع مشابه
Preparation of the TiB2 coatings by electroplating in molten salts
The improvement of titanium diboride (TiB2) coatings over the molybdenum substrate was investigated by comparing the electrochemical techniques of continuous current plating (CCP) and periodically interrupted current (PIC). The solvent used was a eutectic Flinak mixture (LiF–NaF– KF, 46.5:11.5:42molar ratio) with solutes K2TiF6 andKBF4 with the electrochemically-active components in themolar ra...
متن کاملA Thin Film Preparation Using Focused High Power Ion
Among the well known physical methods of thin film preparation as target evaporation by magnetron irradiation, by laser, electron and long pulse ion beams, the method of precipitation of evaporated target material with short pulse ( < 100 ns) and high power (>10 W/cm) ion beam seems to be less investigated. The advantages of such method are: 1. high precipitation velocity ( 1 Jlm per shot); 2. ...
متن کاملHigh-definition conductive silver patterns on polyimide film via an ion exchange plating method
In this work, we developed a new ion exchange plating (IEP) method that is different to traditional electrochemical plating or electroless plating techniques. A variety of silver patterns were prepared by using the IEP technique as demonstrated in this work. The key factors to the definition and the conductive performance of silver patterns were systematically studied. Mechanisms of the formati...
متن کاملIon Plating Can Improve Coating Adhesion
1. Easy to plate: steel, copper and brass. These can be coat* with adherent deposits that will riot fail at the deposit-substrate interface. 2. Special treatment: stainless steels, aluminum, beryllium, magnesium and plastics. These can also be coated with adherent deposits that will not fail at the deposit-substrate interface. 3. Very difsicult: titanium, molybdenum, tungsten, niobium, tantalum...
متن کاملPreparation and growth of SnS thin film deposited by spray pyrolysis technique
In this paper thin films of tin sulfide (SnS) were deposited on the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. In this work the characteristic of SnS thin films investigated. The XRD pattern and optical transmittance of thin films also are discussed. With the change in concen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1989
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.40.598