Preparation of thin solid electrolyte by hot-pressing and diamond wire slicing
نویسندگان
چکیده
منابع مشابه
Thin-Film Transistors Obtained by Hot Wire CVD
(1) Departament d'Enginyeria Electrònica. Jordi Girona 1-3, Mòdul C4. Universitat Politècnica de Catalunya (Barcelona, Spain). (2) Departament d'Enginyeria Electrònica. Universitat Rovira i Virgili (Tarragona, Spain). (3) Departament de Física Aplicada i Òptica. Universitat de Barcelona (Barcelona, Spain) Abstract Hydrogenated microcrystalline silicon films obtained at low temperature (150oC-28...
متن کاملComparison of Creep Behavior in Alumina Based Ceramics Densified by Spark Plasma Sintering and Hot Pressing
Spark plasma sintering (SPS) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. Owing to the advantage of rapid heating, the alumina ceramics obtained by SPS have a grain size and density comparable to those of hot pressed ones. The increase of densification rate may be related to some difference in ion transport characteristics. This study...
متن کاملExperimental Study on Slicing of Sapphire with Fixed Abrasive Diamond Wire Saw
Experimental study on slicing of sapphire with fixed abrasive diamond wire saw was conducted in this paper. The process parameters were optimized through orthogonal experiment of three factors and four levels. The effects of wire speed, feed speed and tension pressure on the surface roughness were analyzed. Surface roughness in cutting direction and feed direction were both detected. The result...
متن کاملarchitecture and engineering of nanoscale sculptured thin films and determination of their properties
چکیده ندارد.
15 صفحه اولRapid consolidation of powdered materials by induction hot pressing.
A rapid hot press system in which the heat is supplied by RF induction to rapidly consolidate thermoelectric materials is described. Use of RF induction heating enables rapid heating and consolidation of powdered materials over a wide temperature range. Such rapid consolidation in nanomaterials is typically performed by spark plasma sintering (SPS) which can be much more expensive. Details of t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RSC Advances
سال: 2019
ISSN: 2046-2069
DOI: 10.1039/c9ra00711c