Preparation of Tantalum and Niobium Metalpowders
نویسندگان
چکیده
منابع مشابه
Preparation of ingots of uranium-niobium alloy
A study was made of the preparation of a uranium 10 w/o niobium alloy by the bomb reduction of a suitable form of niobium and uranium tetrafluoride with calcium. A compound with a probable formula of Na2NbOF5 proved to be most satisfactory as the source of niobium. High yields and good metal-slag separations were obtained. Chemical analysis and density determinations showed the composition to b...
متن کاملGreen extraction of Niobium and Tantalum from Kenticha Tantalite ore using 1-Ethyl-3-Methyl Imidazolium Chloride ionic liquid
The decomposition of the Ethiopian Kenticha tantalite ore was studied using the KOH fusion and H2O leaching system at 400 0C for a 1 h reaction time. The experimental results obtained showed that 27 wt% of Ta2O5 was mainly transformed into insoluble KTaO3, not to be KNbO3, and as well, into the dissolved liquor containing 94.73 vol% of Nb2O5 and 75.80 vol% of Ta2O5. The observations, supported ...
متن کاملexploring motivation and english test preparation strategies of iranian pre-university candidates during and at the end of test preparation period for konkur examination
the current study aimed at investigating the relationship between motivation and test preparation strategies (tpss) used by iranian pre-university students in their preparation period for the university entrance exam (uee). due to the importance of uee in iran, this study also attempted to show its impact on these two important variables. to this end, 100 pre-university students in an iranian p...
Effect of heat input on microstructure and strength of welds in tantalum and niobium alloys
Welding of niobium and tantalum materials is currently conducted in vacuum or inert gas chambers, which limits the size of the equipment to be produced. The objective of this study is to investigate the means to make TIG welding on these materials in atmospheric environment and analyse the effect of heat input on the properties of welds. It was found that it is possible to make TIG welds on the...
متن کاملPreparation and characterization of cellulose/hydrous niobium oxide hybrid.
A composite of cellulose extracted from bagasse with Nb2O5·nH2O in three different proportions (16.67, 37.5 and 50.0 wt%) was prepared using the co-precipitation method. The materials were characterized by X-ray diffractometry (XRD), Fourier transform infra-red spectroscopy (FTIR), thermogravimetric analysis (TG/DTG), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Electrochemical Society of Japan
سال: 1960
ISSN: 0013-4678,2435-5666
DOI: 10.5796/jesj.28.7-9.e143