Preparation of Synthetic Titania Slag Relevant to the Industrial Smelting Process Using an Induction Furnace

نویسندگان

چکیده

A high titania slag that is used as a feedstock for TiO2 manufacturing obtained by ilmenite smelting (FeO.TiO2). The composition of the dependent on mineral preparation, i.e., in our study. At laboratory scale, slags are mostly using raw material. An easy and simple way would be to prepare synthetic individual components heating them temperature furnace. has oxidizing nature requires an inert atmosphere prevent oxidation well molybdenum crucible. This paper describes preparation induction furnace study phases formed slag. X-ray powder diffraction (XRD), scanning electron microscopy (SEM), inductively coupled plasma-optical emission spectroscopy (ICP-OES) were analytical techniques studying comparison between industrial was performed test possibility preparing per required composition. show similar phase formation slags, which means identical slags.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Computational Fluid Dynamic Modeling Study of Slag Fuming in Top Submerged Lance Smelting Furnace

Slag fuming is a process of extracting zinc from molten slag in the form of metal vapor by injecting or adding a reducing source such as pulverized or lump coal, natural gas, etc. Top Submerged Lance (TSL) technology has been successfully applied to extract zinc by a fuming process from residues from the zinc industry, ISF and QSL slag and Lead blast furnace slag. A Computational Fluid Dynamic ...

متن کامل

Improvement of Early Strength of Cement Mortar Containing Granulated Blast Furnace Slag Using Industrial Byproducts

In the field of construction, securing the early strength of concrete (on the first and third days of aging) has been an important problem in deciding the mold release time (i.e., shortening the construction time period). Therefore, the problem of reduced compressive strength in the early aging stage caused by mixing granulated blast furnace slag (GBFS) with concrete must certainly be resolved....

متن کامل

The Phase Composition of Electric Furnace Slag

Elementary and phase composition as well as micrography of the electric furnace slag were examined. The base of slag is made from phases containing Fe, Mn and Ca. Grains differ in size and shape, they cling together to form bigger or smaller agglomerates, depending on separated fractions. Relative distribution of identified phases in separated fractions is presented and the possibility of phase...

متن کامل

Ground Granulated Blast Furnace Slag

1. Ground Granulated Blast Furnace Slag Ground Granulated Blast Furnace Slag (GGBFS) is a by product of the steel industry. Blast furnace slag is defined as “the non-metallic product consisting essentially of calcium silicates and other bases that is developed in a molten condition simultaneously with iron in a blast furnace.” [1] In the production of iron, blast furnaces are loaded with iron o...

متن کامل

Application of nonlinear model predictive control to an industrial induction heating furnace

Induction Heating Furnaces are used extensively in industry. The basic principle is that induced eddy currents are used to heat a ferromagnetic material as it passes through a series of coils. Because of the importance of such systems, there has been on-going interest in their design and operation. Past work includes model development from physical principles and optimal design of operational p...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Applied sciences

سال: 2021

ISSN: ['2076-3417']

DOI: https://doi.org/10.3390/app11031153