Preparation of Superconducting Ba<sub>2</sub>YCu<sub>3</sub>O<sub>7-δ</sub> Thin Films by the Dipping-Pyrolysis Process Using Metal Naphthenates and Acetylacetonates
نویسندگان
چکیده
منابع مشابه
Deposition and characterization of SnO2:Sb thin films fabricated by the spray pyrolysis method
In this study, thin films of transparent semiconductor tin oxide doped with antimony impurities on the glass substrates with different concentrations of antimony that have been prepared using spray pyrolysis method. The effects of different concentration of antimony on the structural, optical, and electrical properties of the thin films were investigated. Prepared layers were characterized by X...
متن کاملarchitecture and engineering of nanoscale sculptured thin films and determination of their properties
چکیده ندارد.
15 صفحه اولStructural and electrical properties of In-doped vanadium oxide thin films prepared by spray pyrolysis
The In-doped vanadium pentoxide nanostructures with different doping levels including 0, 10, 20 and 30 at.% were prepared by the spray pyrolysis technique. The prepared thin films were characterized by the x-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD results revealed that the films were crystalline in tetragonal phase. Increasing the In-doping level made the structure...
متن کاملThe effect of Ga-doping on the structural and optical properties of ZnO thin films prepared by spray pyrolysis
In this research, zinc oxide thin films with gallium impurity have been deposited using the spray pyrolysis technique. The structural and optical properties of these films are investigated as a function of gallium doping concentrations. The ZnO and ZnO:Ga films grown at a substrate temperature of 350 ºC with gallium doping concentrations from 1.0 to 5.0.%. The XRD analysis indicated that ZnO f...
متن کاملPreparation and growth of SnS thin film deposited by spray pyrolysis technique
In this paper thin films of tin sulfide (SnS) were deposited on the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. In this work the characteristic of SnS thin films investigated. The XRD pattern and optical transmittance of thin films also are discussed. With the change in concen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 1989
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.97.454