Preparation of Stereocomplex Polylactide/Poly(Butylene Succinate) Blends by Melt Blending
نویسندگان
چکیده
منابع مشابه
Morphology of polycaprolactone/needle-shaped hydroxyapatite (PCL/HAN) nanocomposite blends using ultrasound assisted melt blending
Polycaprolactone/Hydroxyapatite (PCL/HA) composite is an excellent material for fabricating tissue engineering scaffolds, especially as bone scaffolds. However, polarity differences between the hydrophilic HA and the hydrophobic PCL often leads to poor dispersion during the blending process. This is due to the tendency of the HA particles to agglomerate, and the difficulty to efficiently mix th...
متن کاملSynthesis and Properties of Plasticized Sulfur-Montmorillonite Nanocomposites by Melt-Blending
Plasticized sulfur/montmorillonite nanocomposites were prepared by the melt-blending method and the dispersion of montmorillonite (MMT) and the mechanical properties of the nanocomposites were studied. Natural sodium montmorillonite (NaMMT) and organically modified montmorillonite (OMMT) were used as filler. Scanning electron microscope (SEM), X-Ray powder Diffraction (XRD...
متن کاملCompetitive Stereocomplexation and Homocrystallization Behaviors in the Poly(lactide) Blends of PLLA and PDLA-PEG-PDLA with Controlled Block Length
Stereocomplex poly(lactide) (PLA) was obtained by solution blending of linear PLLA and PDLA-PEG-PDLA. Effects of the L/D ratios, PEG block, and PDLA block on stereocomplexation of the blends are systemically discussed. The full stereocomplex PLA can be acquired by solution blending when L/D ratios are in the range of 7/3–5/5. The experiment results demonstrated that the stereocomplex degree of ...
متن کاملImpact, thermal and biodegradation properties of high impact polystyrene/corn starch blends processed via melt extrusion
High impact polystyrene (HIPS)/corn starch blends were prepared in presence of glycerol as a plasticizer via melt extrusion process by a twin-screw extruder. The novelty of this work is first, because of the use of pre-gelatinized corn starch as modified one and second, the procedure of making blends by extruder which makes it ease of access and also industrially possible. The blends were then ...
متن کاملEnhancing the Dyeability of Polypropylene Fibers by Melt Blending with Polyethylene Terephthalate
Attempts were made to modify polypropylene fibers by melt blending with polyethylene terephthalate in order to enhance the dyeability of the resultant fiber. Five blends of polypropylene/polyethylene terephthalate/compatibilizer were prepared and subsequently spun into fibers. Three disperse dyes were used to dye such modified fibers at boiling and 130 °C. The dyeing performance of the blend fi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Oriental Journal of Chemistry
سال: 2019
ISSN: 0970-020X,2231-5039
DOI: 10.13005/ojc/350306