Preparation of SrTiO3 Ceramic Foam from Alkoxide-Derived Oxide Green Sheets Containing Polymer Microspheres via Polymer Extraction. Part 2. Influence of Additional Amount of polymer Microsheres on SrTiO3 Ceramic Foam.
نویسندگان
چکیده
منابع مشابه
Foam superstabilization by polymer microrods.
Few foam systems stabilized by solid particles have been reported, and usually the particles have been used in combination with surfactants. We report how foams can be stabilized solely with a new class of anisotropic particles, hydrophobic polymer microrods of diameter less than 1 mum and length of a few tens of micrometers. The obtained foams were extraordinary stable, retaining a constant vo...
متن کاملFracture of ceramic/ceramic/polymer trilayers for biomechanical applications.
Fracture damage in trilayers consisting of outer and inner brittle layers bonded to a compliant (polycarbonate) substrate and subjected to concentrated surface loading is analyzed. The principal mode of fracture is radial cracking at the undersurface of the inner (core) layer, even in the strongest of core ceramics--other damage modes, including radial cracking in the outer (veneer) layer, are ...
متن کاملTubular Ceramic Foam Via Polymeric Sponge Method
Tubular ceramic foams were prepared by using natural clay as starting material and 120 ppi polyurethane foam as template via polymeric sponge method. Samples were sintered with different temperatures from 1200°C to 1280°C. The result shows that 1250°C is the ideal sintering temperature where the highest compressive strength of 1.980MPa at 47.31% porosity is obtained. The highest value in compre...
متن کاملRheology of Ceramic-powder-filled Polymer Melts
Ceramic powder (zirconia) was mixed with binder consisting polypropylene, paraffin and stearic acid in elastic extruder. Steady and oscillatory shear flow properties of these materials in the molten state were measured on a cone-plate rheometer; parallel superposed steady and oscillatory shear flow experiments were also carried out. Moreover, flow properties at high shear rates were measured on...
متن کاملFracture of Ceramic-Polymer Composite Biomaterials
Fracture toughness, strength, and elastic modulus of poly(methyl methacrylate) (PMMA)and poly(buty1 methacrylate) (PBMA)-impregnated alumina ceramics were measured as a function of polymer volume fraction, mean polymer particle size, and interfacial bonding between the polymer and ceramic. Fracture toughness was found to increase with increasing polymer volume fraction and decreasing polymer pa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2000
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.108.1258_581