PREPARATION OF PS/CaCO<SUB>3</SUB> COMPOSITE NANOPARTICLES AND PS HOLLOW NANO-SPHERES
نویسندگان
چکیده
منابع مشابه
Preparation and characterization of hollow spheres of rutile.
Hollow spherical particles of rutile were obtained by coating colloidal polystyrene beads with a titanium oxide hydrate layer and subsequently calcining at elevated temperatures under an oxygen atmosphere. In order to investigate the optimum conditions for the preparation of these hollow beads the maximum temperature and heating rate were systematically varied. The dimensions of the voids and t...
متن کاملPreparation of hollow silica spheres with holes on the shells.
Hollow silica spheres with holes on the shells were prepared using l-16Ala6PyBr via a sol-gel method.
متن کاملPreparation of Hollow Fibre Composite Reverse Osmosis Membrane
A novel thin-film composite (TFC) reverse osmosis (RO) membrane was developed by the interfacial polymerization (IP) of trimesoyl chloride (TMC) and m-phenylene diamine (MPD) on the hollow fibre ultrafiltration polysulphone (PS) membrane. The performance of the TFC membrane was optimized by studying the preparation parameters, which included monomer TMC concentration, monomer MPD concentration ...
متن کاملPreparation of Fe3Si/Ferrite Micro- and Nano-Powder Composite
Composite material based on Fe3Si micro-particles and Mn-Zn nano-ferrite was prepared using powder metallurgy technology. The sol-gel followed by autocombustion process was used for synthesis of Mn0.8Zn0.2Fe2O4 ferrite. 3 wt.% of mechanically milled ferrite was mixed with Fe3Si powder alloy. Mixed micro-nano powder system was homogenized by the Resonant Acoustic Mixing using ResodynLabRAM Mixer...
متن کاملPreparation and corrosion behavior evaluation of amalgam/titania nano composite
BACKGROUND Many attempts have been performed and continued for improvement of dental amalgam properties during last decades. The aim of present research was fabrication and characterization of amalgam/titania nano composite and evaluation of its corrosion behavior. MATERIALS AND METHODS In this experimental research, nano particles of titania were added to initial amalgam alloy powder and the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Polymerica Sinica
سال: 2009
ISSN: 1000-3304
DOI: 10.3724/sp.j.1105.2009.00134