Preparation of Polymer Membranes by In Situ Interfacial Polymerization
نویسندگان
چکیده
منابع مشابه
Performance and Structure of Thin Film Composite Reverse Osmosis Membranes Prepared by Interfacial Polymerization in the Presence of Acid Acceptor
During interfacial polymerization (IP) reaction between m-phenylenediamine (MPDA) and trimesoyl chloride (TMC), a by-product, i.e. hydrochloric acid can produce. This produced acid diffuses back in aqueous phase and protonates MPDA and reduces its reactivity that results in lowering of polymer yield and performance of membrane. Further, for getting consistency in reverse...
متن کاملPreparation and Characterization of Layered Silicate Polyethylene Terephthalate Nanocomposite by in Situ Polymerization
A series of experiments on the synthesis of poly (ethylene terephthalate) (PET)/organo-montmorillonite (MMT) nanocomposites were carried out in a pressurized reactor using alkyl ammonium exchanged smectite clays, (Closite 30B).Given the degradation of organoclay at high temperatures, the in situ polymerization process was carried out at mild temperatures ranging from 210 to 230°C for 40 minutes...
متن کاملSimulation of thin film membranes formed by interfacial polymerization.
Interfacial polymerization is widely used today for the production of ultrathin films for encapsulation, chemical separations, and desalination. Polyamide films, in particular, are employed in manufacturing of reverse osmosis and nanofiltration membranes. While these materials show excellent salt rejection, they have rather low water permeability, both properties that apparently stem from the r...
متن کاملPreparation and Characterization of Polymer TiO2 Nanocomposites via In-situ Polymerization
............................................................................................................................ iii
متن کاملPreparation and application of conducting polymer/Ag/clay composite nanoparticles formed by in situ UV-induced dispersion polymerization
In this work, composite nanoparticles containing polypyrrole, silver and attapulgite (PPy/Ag/ATP) were prepared via UV-induced dispersion polymerization of pyrrole using ATP clay as a templet and silver nitrate as photoinitiator. The effects of ATP concentration on morphology, structure and electrical conductivity were studied. The obtained composite nanoparticles with an interesting beads-on-a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Polymer Science
سال: 2019
ISSN: 1687-9422,1687-9430
DOI: 10.1155/2019/6217924