Preparation of Platinum/Alumina Composite Membrane Using Electroless-plating Technique.
نویسندگان
چکیده
منابع مشابه
Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique
A palladium composite membrane was prepared via electroless plating technique using organic-inorganic method during activation process. The ceramic support surface was modified by two TiO2-boehmite and one γ-alumina layers to avoid Pd penetration in support pores. Thin and defect-free Pd composite membrane was obtained by creating a relative smoothness on the ceramic support and using Pd nanopa...
متن کاملpreparation of pd composite membrane via organic-inorganic activation method in electroless plating technique
a palladium composite membrane was prepared via electroless plating technique using organic-inorganic method during activation process. the ceramic support surface was modified by two tio2-boehmite and one γ-alumina layers to avoid pd penetration in support pores. thin and defect-free pd composite membrane was obtained by creating a relative smoothness on the ceramic support and using pd nanopa...
متن کاملNovel Electroless Plating of Ruthenium for Fabrication of Palladium-Ruthenium Composite Membrane on PSS Substrate and Its Characterization
This paper focused on a novel method of electroless plating ruthenium (Ru) on solid or porous substrates like porous stainless steel (PSS) discs or ceramic tubes. A novel complexing plating bath of Ru was developed. It is proven that Ru can be deposited directly on these substrates by the bath at a temperature of 328 K and strong alkaline environment. TGA, SEM, EDX and XRD confirmed the success...
متن کاملPreparation of the Copper Coatings on Fe Powder by Electroless Plating Technique
The electroless coating technique is one of the elegant methods available for the production of protective coatings on surface. Our study has been aimed at the conditions of the electroless deposition of copper coating onto the iron powder particles from sulphate electrolyte. The course of the electroless process depends on the composition and pH of the electrolyte as well as on the size and co...
متن کاملElectroless Nickel Plating with Hypophosphite
In the previous chapter, the components of electroless nickel plating baths were discussed from the viewpoint of the function each performs in the bath, with little attention paid to their effect on the plating process. The metal and the electron source (the reducing agent) are consumed in the electroless plating reaction and so their concentrations in the bath are continuously decreasing. Ther...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1997
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.48.470