Preparation of piezoelectric PZT micro-discs by sol-gel method
نویسندگان
چکیده
منابع مشابه
Preparation of Silica by Sol-Gel Method Using Formamide
In this work we obtained microporous and mesoporous silica gels by sol-gel processing. Tetraethylortosilicate (TEOS) was used as precursor. Nitric acid and hydrofluoric acid were used as catalysts. In order to study the affect of formamide as drying additive, we used a molar ratio alkoxide/formamide of 1/1. The performance of formamide in obtaining crack-free gels was evaluated through monolith...
متن کاملSol-Gel Synthesis and Piezoelectric and Structural Properties of Zr –rich PZT Nanoparticles
Lead zirconate titanate (PZT) nanopowders with spherical-shaped morphology, perovskite structure and an average size of 20 nm were successfully synthesized. The prepared PZT nanopowders were characterized by differential thermal analysis (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), Energy dispersive X-ray (EDS) and Transmission electron microscopy (TEM) technique. Single-...
متن کاملSensitivity of Piezoelectric Ultrasonic Microsensors with Sol-Gel Derived PZT Films Prepared through Various Pyrolysis Temperatures
Sensitivity of piezoelectric-diaphragm type ultrasonic microsensors were investigated with sol-gel derived lead-zirconate-titanate (PZT) films prepared through various pyrolysis temperatures. The residual stress of the PZT film should be precisely controlled because the sensor diaphragms show static deflection by buckling and highly sensitive sensors have been realized on upward-buckled diaphra...
متن کاملPreparation and investigation of magnetic properties of Manganese Cadmium ferrite nanoparticles by Sol-gel method
In the present investigation, manganese ferrite nanoparticles substituted by cadmium with Mn1-xCdxFe2O4 composition and substituted amount x=(0, 0.1, 0.3, 0.5) were prepared by Sol-gel method. Pattern analysis of X-ray diffraction (XRD) confirmed ferrite single phase structure in all samples. The average crystal size was estimated from 17 to 22 nm. The chemical bonds and ferrite formation phase...
متن کاملPREPARATION AND CHARACTERIZATION OF TiO2 Fe2O3 NANOCOMPOSITE BY SOL GEL METHOD
Nanocomposites have improved aspect ratio and better mechanical properties when compared to the composites which had structures less than 100nm They are 1000 times tougher compared to conventional composites. Besides mechanical properties, nanocomposites also have improved electrical conductivity, thermal stability, chemically resistant, flame retardant and low permeability. TiO2 finds its best...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Sensors and Micromachines
سال: 2001
ISSN: 1341-8939,1347-5525
DOI: 10.1541/ieejsmas.121.496