Preparation of Palm Oil Mill Effluent Sludge Biochar for the Treatment of Landfill Leachate
نویسندگان
چکیده
منابع مشابه
Electrocoagulation of Palm Oil Mill Effluent
Electrocoagulation (EC) is an electrochemical technique which has been employed in the treatment of various kinds of wastewater. In this work the potential use of EC for the treatment of palm oil mill effluent (POME) was investigated. In a laboratory scale, POME from a factory site in Chumporn Province (Thailand) was subjected to EC using aluminum as electrodes and sodium chloride as supporting...
متن کاملA Review of Palm Oil Mill Effluent (Pome) Water Treatment
Palm oil is one of the two most important vegetable oils in the world’s oil and fats market. The extraction and purification processes generate different kinds of waste generally known as palm oil mill effluent (POME). The environmental impact of POME cannot be over emphasized; hence the need for treatment measures to reduce these impacts before discharge. Therefore, this paper reviews the proc...
متن کاملProduction of Biogas from Palm Oil Mill Effluent at Pilot Scale: Effect of Recycle Sludge
An anaerobic digestion of palm oil mill effluent (POME) for production of biogas was carried out at pilot scale under thermophilic condition. The objective of this research is to maintain short hydraulic retention time (HRT) and high degradation of the POME to biogas by applying recycle sludge. Fresh POME from PTPN IV without further treatment was used as feed. The fermentation process occurred...
متن کاملReactivation of Preserved Aerobic Granular Sludge Using Palm Oil Mill Effluent
Generation of wastes in the form of palm oil mill effluent (POME) is unavoidable due to increase in oil palm development worldwide. Direct discharge of POME into receiving water bodies is strongly discouraged due to high chemical and biochemical oxygen demand concentrations, respectively. Aerobic granulation technology features microbial aggregates generated following immobilization and cell-to...
متن کاملRespirometric analysis of activated sludge models from palm oil mill effluent.
Activated sludge models (ASMs) have been widely used as a basis for further model development in wastewater treatment processes. Values for parameters to be used are vital for the accuracy of the modeling approach. A continuous stirred tank reactor (CSTR), as open respirometer with continuous flow for 20 h is used in ASMs. The dissolved oxygen (DO) profile for 11 days was monitored. It was foun...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2017
ISSN: 2261-236X
DOI: 10.1051/matecconf/201710306008