Preparation of Ni Nano-particle by Rotary Chemical Vapor Deposition
نویسندگان
چکیده
منابع مشابه
Electrical characterization of graphene synthesized by chemical vapor deposition using Ni substrate.
In this work, the electrical characterization of graphene films grown by chemical vapor deposition (CVD) on a Ni thin film is carried out and a simple relation between the gate-dependent electrical transport and the thickness of the films is presented. Arrays of two-terminal devices with an average graphene film thickness of 6.9 nm were obtained using standard fabrication techniques. A simple t...
متن کاملSnO2 coated Ni particles prepared by fluidized bed chemical vapor deposition
A Fluidized Bed Metal–Organic Chemical Vapor Deposition (FB-MOCVD) process was developed for the growth of tin oxide thin films on large hollow Ni particles. Tetraethyl tin was used as tin source and dry air both as fluidization gas and oxidant reagent. The SnO2 films were grown in a FBCVD reactor under reduced pressure (13.3 kPa) in the temperature range of 633–663 K. A series of specific expe...
متن کاملDetermination of Optical Properties in Germanium Carbon Coatings Deposited by Plasma Enhanced Chemical Vapor Deposition
In this research, Germanium-carbon coatings were deposited on ZnS substrates by plasma enhanced chemical vapor deposition (PECVD) using GeH4 and CH4 precursors. Optical parameters of the Ge1-xCx coating such as refractive index, Absorption coefficient, extinction coefficient and band gap were measured by the Swanepoel method based on the transmittance spectrum. The results showed that the refra...
متن کاملPreparation of Bismuth Titanate Films by Electron Cyclotron Resonance Plasma Sputtering-Chemical Vapor Deposition
Bismuth titanate (Bi,Ti,O,, :BIT) thin films were prepared on the Pt courted MgO(100) substrate by electron cyclotron resonance plasma sputtering-chemical vapor deposition (ECR plasma sputtering-CVD). Bi20, was used as a sputtering target and tetra-isopropoxy-titanium [Ti(i-C3H70)4] as a CVD source. The composition of films was controlled by changing RF power (P,,) of Bi,O, target and Ti source...
متن کاملGrowth of carbon nanostructures upon stainless steel and brass by thermal chemical vapor deposition method
The lack of complete understanding of the substrate effects on carbon nanotubes (CNTs) growth poses a lot oftechnical challenges. Here, we report the direct growth of nanostructures such as the CNTs on stainless steel 304and brass substrates using thermal chemical vapor deposition (TCVD) process with C2H2 gas as carbon sourceand hydrogen as supporting gas mixed in Ar gas flow. We used an especi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2017
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.64.677