Preparation of Ni-B-SiC composite coatings by electroless plating.
نویسندگان
چکیده
منابع مشابه
Electroless Ni–P composite coatings
This review outlines the development of electroless Ni–P composite coatings. It highlights the method of formation, mechanism of particle incorporation, factors influencing particle incorporation, effect of particle incorporation on the structure, hardness, friction, wear and abrasion resistance, corrosion resistance, high temperature oxidation resistance of electroless Ni–P composite coatings ...
متن کاملRoughness Optimization of Electroless Ni-B Coatings Using Taguchi Method
In this paper, the authors present an experimental study of roughness characteristics of electroless Ni-B coatings and optimization of the coating process parameters based on L27 Taguchi orthogonal design. Three coating process parameters are considered viz. bath temperature, reducing agent concentration, and nickel source concentration. It is observed that concentration of reducing agent toget...
متن کاملPreparation of the Copper Coatings on Fe Powder by Electroless Plating Technique
The electroless coating technique is one of the elegant methods available for the production of protective coatings on surface. Our study has been aimed at the conditions of the electroless deposition of copper coating onto the iron powder particles from sulphate electrolyte. The course of the electroless process depends on the composition and pH of the electrolyte as well as on the size and co...
متن کاملThe Preparation, Characterization, and Influence of Multiple Electroless Nickel-Phosphorus (Ni-P) Composite Coatings on Poplar Veneer
Nickel-Phosphorus (Ni-P) composite coatings were prepared on a poplar veneer surface via a simple electroless nickel (Ni) approach. The substrate deformation, flatness, crystalline structure, and wear resistance of the NiP composite coatings were investigated. The deformation degree of the substrate decreased as the number of deposition steps was increased. The flatness and wear resistance of t...
متن کاملManufacture of Electroless Nickel/YSZ Composite Coatings
The paper discusses optimising work on a method of processing ceramic / metal composite coatings for various applications and is based on preliminary work on processing anodes for solid oxide fuel cells (SOFCs). The composite coating is manufactured by the electroless co-deposition of nickel and yttria stabilised zirconia (YSZ) simultaneously on to a ceramic substrate. The effect on coating cha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1989
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.40.831