Preparation of Light Fuel Fractions from Heavy Vacuum Gas Oil by Thermal Cracking Reaction
نویسندگان
چکیده
منابع مشابه
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولOlefin production from catalytic cracking of light fuel oil over different additives
The catalytic cracking of a fuel oil over fluid catalytic cracking (FCC) catalyst has been investigated applying different additives. Catalyst mixtures consisting of a equilibrium FCC catalyst (E-Cat) blended with ZSM-5, MCM-41 and Mordenite additives were examined at the additive levels of 25 wt.%. The catalytic performance of the matrix was studied in a fixed bed micro-activity test unit (MAT...
متن کاملOlefin production from catalytic cracking of light fuel oil over different additives
The catalytic cracking of a fuel oil over fluid catalytic cracking (FCC) catalyst has been investigated applying different additives. Catalyst mixtures consisting of a equilibrium FCC catalyst (E-Cat) blended with ZSM-5, MCM-41 and Mordenite additives were examined at the additive levels of 25 wt.%. The catalytic performance of the matrix was studied in a fixed bed micro-activity test unit (MAT...
متن کاملSulfur distribution in the oil fractions obtained by thermal cracking of Jordanian El-Lajjun oil Shale
The extracted shale oil by the thermal cracking process of the El-Lujjan oil shale showed that the yield of oil was around 12 wt%. The amount of sulfur in this shale oil was found to increase (from 7 to 9.5 wt%) with the increase of the boiling point for different distillate fractions. Sulfur in Jordanian oil shale was found to be mainly organic sulfur with negligible amounts of inorganic sulfu...
متن کاملProduction of Light Olefins through Gas Oil Cracking
Light olefins such as ethylene, propylene, and butylenes, are basic building blocks for petrochemicals. Further, these olefins are also useful for production of clean fuels such as alkylates – which have high octanes but no sulfur, olefins, and aromatics – or as octaneenhancers such as ethers. The conventional olefin production process is steam cracking of C2−C4 light paraffins from natural gas...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Al-Khwarizmi Engineering Journal
سال: 2017
ISSN: 2312-0789,1818-1171
DOI: 10.22153/kej.2017.11.003