Preparation of Hydrophobic Platinum Electrodes by Composite-Plating
نویسندگان
چکیده
منابع مشابه
Accurate tuning of ordered nanotubular platinum electrodes by galvanic plating.
Platinum nanotubes are created by galvanic deposition inside porous templates. The effects of the electrolyte's ion concentration and pH, of the applied potential and of the deposition duration on the morphology of the tubes are investigated systematically. The system provides a model electrode platform with accurately tunable geometry for the fundamental investigation of electrochemical transf...
متن کاملPreparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique
A palladium composite membrane was prepared via electroless plating technique using organic-inorganic method during activation process. The ceramic support surface was modified by two TiO2-boehmite and one γ-alumina layers to avoid Pd penetration in support pores. Thin and defect-free Pd composite membrane was obtained by creating a relative smoothness on the ceramic support and using Pd nanopa...
متن کاملCarbon-based Composite Electrodes: Preparation, Characterization and Application in Electroanalysis
Electrodes based on carbon, i.e., expanded graphite (20%, wt.)-epoxy composite(20EG-Epoxy) and expanded graphite (20%, wt.)-polystyrene composite (20EG-PS) havebeen prepared, characterized using scanning electron microscopy (SEM) and cyclicvoltammetry (CV), and tested as anodic sensors. The electrodes exhibited good mechanicalresistance and low electrical resistances. Scan rate dependent cyclic...
متن کاملNormal Heptane Reforming of Promoted Platinum Composite Catalysts: Preparation, Characterization and Catalytic Performance
Pt/Zr(x)-HMS/HZSM-5 catalysts with different ratios of Silicium/Zirconium (denoted as x) were studied for normal heptane reforming at 350-450 °C temperature range. For this purpose, the properties of the catalysts such as X-ray diffraction, X-ray fluorescence, Fourier-transform infrared spectroscopy, Ultraviolet–visible diffuse reflectance spectroscopy, NH3-temperature pro...
متن کاملinvestigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem
در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Denki Kagaku oyobi Kogyo Butsuri Kagaku
سال: 1998
ISSN: 0366-9297,2434-2556
DOI: 10.5796/kogyobutsurikagaku.66.720