Preparation of Fe-Mo, Co-Mo and Ni-Mo amorphous alloys by electroplating method.
نویسندگان
چکیده
منابع مشابه
Interdiffusion of Refractory Elements in Fe-Cr-X (X-Mo, W) and Fe-Mo-W Ternary Iron Alloys
Interdiffusion coefficients of the refractory elements in Fe-Cr-X (X 1⁄4 Mo, W) and Fe-Mo-W ternary alloys were measured on the basis of the modified Boltzmann-Matano method for ternary systems. The cross interdiffusion coefficient, ~ D CrW was positive in Fe-Cr-W ternary alloy, indicating that W accelerates interdiffusion between Fe and Cr atoms. On the other hand, the cross interdiffusion coe...
متن کاملHigh Magnetic Permeability Alloys Hardperm in the Ni-Fe-Ta-Mo System*
Starting materials used were 99.8% pure nickel, 99.9% pure iron, 99.9% pure tantalum, and 99.9% pure molybdenum. The materials in a total weight of 500g were melted with a high-frequency induction furnace in vacuum. The melt was poured into an iron mold with an opening of 20mm diameter and 150mm length. After forging, the ingot was reduced to a thin plate 0.3mm in thickness by rolling and a wir...
متن کاملOptimizaton of Mo-Si-B Intermetallic Alloys
Mo-Si-B intermetallics consisting of the phases Mo3Si and Mo5SiB2, and a molybdenum solid solution (“ -Mo”), have melting points on the order of 2000 °C. These alloys have potential as oxidationresistant ultra-high-temperature structural materials. They can be designed with microstructures containing either individual -Mo particles or a continuous -Mo phase. A compilation of existing data shows...
متن کاملComposition, Morphology, and Topography of Galvanic Coatings Fe-Co-W and Fe-Co-Mo
Ternary coatings Fe-Co-W with an iron content of 40-55 at.%, cobalt 39-44 at.%, and tungsten 4-12 at.% and Fe-Co-Mo with an iron content of 40-55 at.%, cobalt 39-44 at.%, and tungsten 4-12 at.% were obtained by galvanostatic and pulse electrolysis on the mild steel substrate from iron(III) citrate-based electrolyte. The influence of electrolysis mode and parameters on composition of deposited a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1989
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.40.458