Preparation of CuInSe2 thin films by travelling zone heater method.
نویسندگان
چکیده
منابع مشابه
ONE STEP ELECTRODEPOSITION OF CuInSe2 THIN FILMS
Formation of CuInSe2 (CIS) thin films from aqueous solution containing citrate as complexing agent is reported. The surface morphology and the composition of the deposited films are characterized by scanning electron microscopy (SEM). The texture of the deposits and their compositions are analyzed by X-ray diffraction and transmission electron microscopy (TEM). Annealing of the films at 350°C i...
متن کاملThe production of Ceramic Thin Films by Sol-Gel Method
The purpose of this work was to production of ceramic thin films by using of Sol-Gel process. For this purpose deposition of SiO2 on substrates of soda-lime glasses has been carried out. Coating treatments on prepared specimen were conducted in a Sol solution by means of dipping at various times. After drying and performing appropriate heat treatment on each sample, the thickness of coated laye...
متن کاملThe production of Ceramic Thin Films by Sol-Gel Method
The purpose of this work was to production of ceramic thin films by using of Sol-Gel process. For this purpose deposition of SiO2 on substrates of soda-lime glasses has been carried out. Coating treatments on prepared specimen were conducted in a Sol solution by means of dipping at various times. After drying and performing appropriate heat treatment on each sample, the thickness of coated laye...
متن کاملEffects of photo-assisted electrodeposited on CuInSe2 thin films
Photo-assisted one-step electrodeposition has been applied to help in forming smooth and dense CuInSe2 films. The difference in surface morphology and crystalline quality between CuInSe2 films with various photo-assistance has been investigated. In the photo-assisted electrodeposition process, the many kinds of lamps providing maximum light intensity at about 380 to 620 nm were used as light so...
متن کاملPost-Deposition Sulfur Incorporation into CuInSe2 Thin Films
The effect of initial film composition and substrate in the sulfurization of CuInSe2 was investigated. CuInSe2 films deposited on either soda-lime glass (SL) or Corning 7059 ® borosilicate glass (7059) substrates were reacted in flowing H2S for times from 1 to 8 hours. Films with Cu-rich composition, Cu/In > 1, reacted for 1 hour had nearly all the Se replaced by S. For Cu-poor films the incorp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Science
سال: 1996
ISSN: 1881-3917,0915-5651
DOI: 10.2978/jsas.8.106