Preparation of cubic SiC from δ-Na2Si2O5/carbon nanocomposite using cobalt catalyst
نویسندگان
چکیده
منابع مشابه
Preparation of Cobalt Oxide/Zinc Oxide Nanocomposite
Cobalt Oxide/ Zinc Oxide nanocomposite was synthesized by dropwise addition ofCo(NO)3.6H2O and Zn(NO3)2.4H2O solutions to KOH solution at different temperatures followed bycalcination at 300ºC for 4 h. The morphology and structure of nanoparticles and the influence oftemperature on particle size were studied using scanning electron microscopy (SEM) and X-RayDiffraction (XRD). Minimum particle s...
متن کاملInfluence of Cobalt Precursor on Efficient Production of Commercial Fuels over FTS Co/SiC Catalyst
β-SiC-supported cobalt catalysts have been prepared from nitrate, acetate, chloride and citrate salts to study the dependence of Fischer–Tropsch synthesis (FTS) on the type of precursor. Com/SiC catalysts were synthetized by vacuum-assisted impregnation while N2 adsorption/desorption, XRD, TEM, TPR, O2 pulses and acid/base titrations were used as characterization techniques. FTS catalytic perfo...
متن کاملPreparation of a Novel Super Active Fischer-Tropsch Cobalt Catalyst Supported on Carbon Nanotubes
The potential of carbon nanotubes (CNT) supported cobalt catalysts for Fischer-Tropsch (FT) reaction is shown. Using the wet impregnation method cobalt on carbon nanotubes catalysts were prepared with cobalt loading varying from 15 to 45 wt. %. The catalysts are characterized by different methods including: BET physisorption, X-ray diffraction, hydrogen chemisorption, and temperature-progra...
متن کاملPreparation of Pectin–ZnO Nanocomposite
Pectin-ZnO nanocomposite was prepared in the aqueous solution condition at room temperature. The Fourier transform infrared, X-ray diffraction, and transmission electron microscope (TEM) measurements confirmed the nanoscaled structure of pectin-ZnO composite. According to the TEM observation, the average composite granules size was about 150 nm and the embedded ZnO nanoparticles were uniform wi...
متن کاملPreparation of β-SiC Coatings Using 1,2-Dimethyldisilane as Precursor
A cold-wall upstream reactor was designed to study the deposition of P-Sic layers on WC-Co hard metal substrates. Experiments demonstrated that P-Sic coatings can be easily deposited on inductively heated substrates at temperatures between 1000-1400°C by thermal decomposition of 1,2-dimethyldisilane under normal pressure conditions. It was shown that this silicon compound is an advanced precurs...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science and Technology of Advanced Materials
سال: 2019
ISSN: 1468-6996,1878-5514
DOI: 10.1080/14686996.2019.1619479