Preparation of Activated Carbon Fibers from Fiber Mixtures
نویسندگان
چکیده
منابع مشابه
A Procedure for Preparation of Semi-activated Carbon Fiber without any Treatment under High Temperature
A procedure for preparation of semi-activated carbon fiber (SACF) without any treatment under high temperature was proposed. The first step of the procedure is coating of an inorganic fiber (E-glass fiber) by an adsorbent mixture including powder activated carbon, methyl cellulose and water. In this work a set of experiments was performed to attain appropriate adsorbent mixture for good quality...
متن کاملFABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
متن کاملPreparation of Activated Carbon from Peat
Peat with an approximate 60% carbon content collected in the suburbs of Palangka Raya, Indonesia, was carbonized, followed by activation with steam in an electric furnace. The resultant activated carbon (AC) had ca. 900 m/g of BET surface area and 1000 mg/g of iodine adsorption. This performance implies that this AC can be used as an adsorbent for environmental purification. We had a carbonizin...
متن کاملWindmill Palm (Trachycarpus fortunei) Fibers for the Preparation of Activated Carbon Fibers
Activated carbon fibers (ACFs) were prepared by steam activation of windmill palm (WP) (Trachycarpus fortunei) fibers in a nitrogen atmosphere at various temperatures in the 600 to 850 °C range, and their characteristics were investigated. The effects of temperature, in terms of porous texture and surface chemistry, were identified through the use of scanning electron microscopy (SEM), nitrogen...
متن کاملPreparation and Characterization of Activated Carbon Fibers from Liquefied Wood by ZnCl2 Activation
In this study, activated carbon fibers (ACFs) were prepared from liquefied wood by chemical activation with ZnCl2, with a particular focus on the effects of temperature and ZnCl2: liquefied wood-based fiber (LWF) ratio on yield, porous texture, and surface chemistry. The characterization and properties of these ACFs were investigated by nitrogen adsorption/desorption, Fourier transform infrared...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Textile Science & Fashion Technology
سال: 2018
ISSN: 2641-192X
DOI: 10.33552/jtsft.2018.01.000510