Preparation of a solid product with high water content and water retention properties
نویسندگان
چکیده
منابع مشابه
Preparation of solid water-equivalent radioactive standards.
The use of a superabsorbent polymer to prepare water-equivalent volume standards by solidification without the need of irradiation to effect the polymerization process, is described. Less than 40 g of the polymer is needed to solidify 1 litre of solution. Monte Carlo simulations of the gamma-ray escape probability indicate that the mixture is water-equivalent to better than 1.0%. During prepara...
متن کاملDielectric properties of low-water-content tissues.
The dielectric properties of two low-water-content tissues, bone marrow and adipose tissue, were measured from 1 kHz to 1 GHz. From 1 kHz to 13 MHz, the measurements were performed using a parallel-plate capacitor method. From 10 MHz to 1 GHz, a reflection coefficient technique using an open-ended coaxial transmission line was employed. The tissue water contents ranged from 1 to almost 70% by w...
متن کاملPreparation of Ceramic Composite Filter with Titanium Oxide Nanoparticles and Active Carbon Content for Treatment of Sea Water
In this mentioned study for sea water treatment ceramic composites were made from natural alumina and adsorbent active ingredients. According to the experimental results, filters along with active agents have acceptable effects on drinking water parameters and contaminants in compare with 1053 ISIRI standard. Modular set up was made for sea water treatment tests. Water flowrate after filtration...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Role of water content in food and product texture*
practically all important properties of the agricultural products, the foods and the biological objects. Among the properties, the important role is played bymechanical properties including the viscoelastic ones. These properties are influenced mainly by temperature and the strain rate but water plays the role of the main plasticizer in the controlling mechanisms. The relative simple models wer...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polish Journal of Chemical Technology
سال: 2020
ISSN: 1899-4741
DOI: 10.2478/pjct-2020-0023