Preparation of a novel zeolite Y-stainless-steel wire mesh honeycomb for VOC capture

Stainless steel wire mesh-supported ZnO for the catalytic photodegradation of methylene blue under ultraviolet irradiation.

The aim of this study was to assess the activity of catalysts formed by nanostructured zinc oxide supported on stainless steel wire mesh for the photocatalytic degradation of methylene blue under UV irradiation. Catalysts prepared by means of different low temperature synthesis methods, as described in a previous work (Vu et al., Mater. Res. Bull. 47 (2012) 1577-1586) were tested. A new activit...

Cold Forming Stainless Steel Bar and Wire

Air Flow through Woven Stainless Steel Mesh

It was known that a mesh screen placed across an airflow will have an evening effect, distributing both the velocity and pressure across the screen, however this effect had not been quantified and the effect of different mesh geometries was unknown. It was desired to understand the relationship between airflow velocity, the pressure behind the screen and the free hole area of the screen. It was...

Characterisation of severely deformed austenitic stainless steel wire

The microstructure of 8 mm diameter wire produced by the severe deformation of 316L austenitic stainless steel has been examined using TEM and X-ray diffraction. The deformation imparted amounts to a true strain of 6.3. Data from previous studies on strain induced transformation of this steel have been combined with new results to show that true strains .2 are required in order to observe mecha...

Stainless steel wire suture technique in thoracic surgery.

Before embarking upon any new surgical procedure or technique three conditions need to be fulfilled. First, it must be shown to be necessary, secondly, there must be sufficient experimental evidence to justify a trial of the new method; and tlhirdly, any advantage the new may appear to have over the old must be shown to possess statistical significance before its final adoption is justified, un...