Preparation, Characterization, and Properties of Polyethylene Composites Partially Filled With Calcium Carbonate through Co-Rotating Conical Twin-Screw Extrusion
نویسندگان
چکیده
منابع مشابه
Properties of Polypropylene Composites Fabricated Using Twin-screw Extrusion
Sunflower hull sanding dust (SHSD) filled polypropylene (PP) composite was prepared using a twin-screw extruder. Mechanical and thermal properties of the SHSD/PP composite were characterized contrasting to organically modified clay /PP composite. Differential scanning calorimetry (DSC) analysis showed that the crystallization temperature and the degree of crystallinity of PP exhibited changes w...
متن کاملMetal Powder-filled Polyethylene Composites. v. Thermal Properties Metal Powder-filled Polyethylene Composites. v. Thermal Properties
Thermal properties—such as thermal conductivity, thermal diffusivity, and specific heat—of metal (copper, zinc, iron, and bronze) powder-filled high-density polyethylene composites are investigated experimentally in the range of filler content 0–24% by volume. Experimental results show a region of low particle content, 0–16% by volume, where the particles are distributed homogeneously in the po...
متن کاملSynthesis and Characterization of Polyamide-66/Calcium Carbonate Composites
Polyamide-66(PA66)/CaCO3 micro- and nano-composites were prepared using a polymer solution method at filler loading of 0, 1, 2 and 3 weight percent. Nano-size of CaCO3 was synthesized by micro-emulsion technique. The material was characterized by XRD, SEM, FTIR and UV-VIS techniques. XRD results of composites suggested that CaCO3 particles are found in the amorphous phase of the semi-crystallin...
متن کاملUpper Bound Analysis of Tube Extrusion Process Through Rotating Conical Dies with Large Mandrel Radius
In this paper, an upper bound approach is used to analyze the tube extrusion process through rotating conical dies with large mandrel radius. The material under deformation in the die and inside the container is divided to four deformation zones. A velocity field for each deformation zone is developed to evaluate the internal powers and the powers dissipated on all frictional and velocity disco...
متن کاملSequential calculation of torque in procedure of twin screw extrusion
The drug making resreach has accentuated on extrusion technology for a long time. The advance of drug bioavailibility, bead manufacturing and granulation is assured by extrusion procedures. There are also diverse effects in resereches with respect to the use of process understanging as a tool in quality management. Many initiatives of FDA such as PAT and QBD are getting accepted. In this survey...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2019
ISSN: 2321-9653
DOI: 10.22214/ijraset.2019.3438