Preparation and thermomechanical properties of stir cast Al-2Mg-11TiO2 (rutile) composite
نویسندگان
چکیده
منابع مشابه
Fabrication of Al/Graphite/Al2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite
Friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized Al2O3 and micro sized graphite particles. A mixture of Al2O3 and graphite particles was packed into a groove with 1 mm width and 4.5 mm depth, which had been cut in 5083 aluminum plate of 10 mm thick. Packed groove was subjected to friction stir processing in order to im...
متن کاملPreparation of ZnO-Polystyerne Composite Films and Investigation of Antibacterial Properties of ZnO-Polystyerne Composite Films
Background & Objectives: Nanotechnology is one of great important part of technology. Nanoparticles can be used in different applications for industrial, medical, military and personal use. The objectives of this study were preparation of Polystyrene/ZnO nanocomposite films via a simple method and investigation of antibacterial activity of them. Methods: Polystyrene /ZnO nanoparticle (PS/nano-...
متن کاملEffect of texture evolution on mechanical and damping properties of SiC/ZnAl2O4/Al composite through friction stir processing
In this investigation, special consideration was given to observe the influence of the acquired ultra-fine-grain (UFG) structure through friction stir processing (FSP) on mechanical and damping properties. As the mechanical behaviour of the composites are intensely related to their microstructure. For deeply understanding the possible mechanism and detailed microstructural observations at a lon...
متن کاملEvaluation of fatigue behavior of cast and ultra-fine processed Al-7075 by using friction stir technique
This paper presents experimental results on the fatigue properties of the modified microstructure of cost Al-alloy 7075 via friction stir processing (FSP). The microstructural behavior was investigated by using optical microscope (OM). The grain size of cast FSP-ed at different locations was investigated via XRD. Uniaxial tensile and bending fatigue tests were carried out at room temperature o...
متن کاملEvaluation of fatigue behavior of cast and ultra-fine processed Al-7075 by using friction stir technique
This paper presents experimental results on the fatigue properties of the modified microstructure of cost Al-alloy 7075 via friction stir processing (FSP). The microstructural behavior was investigated by using optical microscope (OM). The grain size of cast FSP-ed at different locations was investigated via XRD. Uniaxial tensile and bending fatigue tests were carried out at room temperature o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 2004
ISSN: 0250-4707,0973-7669
DOI: 10.1007/bf02707279