Preparation and Surface Modification SiO2 Nano-Powder with Antifriction Properties
نویسندگان
چکیده
منابع مشابه
preparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis
کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.
Preparation of Fe3Si/Ferrite Micro- and Nano-Powder Composite
Composite material based on Fe3Si micro-particles and Mn-Zn nano-ferrite was prepared using powder metallurgy technology. The sol-gel followed by autocombustion process was used for synthesis of Mn0.8Zn0.2Fe2O4 ferrite. 3 wt.% of mechanically milled ferrite was mixed with Fe3Si powder alloy. Mixed micro-nano powder system was homogenized by the Resonant Acoustic Mixing using ResodynLabRAM Mixer...
متن کاملOrganic modification of nano-SiO2 particles in supercritical CO2
Organic modification of nano-SiO2 particles was performed with supercritical CO2 as solvent and a titanate coupling reagent NDZ-201 as the modification reagent. The surface of the nano-SiO2 particles was changed after modification by the titanate coupling reagent from hydrophilic to hydrophobic. IR and thermo-gravimetric analyses indicate that the interaction between the titanate coupling reage...
متن کاملEnhancement of H2-sensing Properties of F-doped SnO2 Sensor by Surface Modification with SiO2
Effects of surface chemical modification with sodium silicate on the gas-sensing properties of F-doped SnO2 gas sensor designed and fabricated employing micro-electro mechanical system (MEMS) technology were investigated. Gas sensing properties of the sensor were checked against combustible gases like H2, CO, CH4 and C3H8 at a heater voltage of 0.7 V. The H2 sensitivity of the surface modified ...
متن کاملExperimental Study on the Physical and Rheological Properties of Bitumen Modified with Different Nano Materials (Nano SiO2 & Nano TiO2)
This study is carried out to explore the effect of nano materials (SiO2 & TiO2) on the physical and rheological properties of Bitumen. To achieve this goal, Nano materials are blended in bitumen in various percentages (0.3, 0.6, 0.9 and 1.2%). The physical and rheological properties of modified binders are characterized using a penetration, softening point, kinematic viscosity and a dynamic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Asian Journal of Chemistry
سال: 2016
ISSN: 0970-7077,0975-427X
DOI: 10.14233/ajchem.2016.19971