Preparation and Properties of Particle Filled Elastomers Prepared by Sol-Gel Process
نویسندگان
چکیده
منابع مشابه
Polyacrylate/silica nanocomposite materials prepared by sol–gel process
Polyacrylate/silica nanocomposite was prepared by sol–gel process via in situ emulsion polymerization. The influence of the synthetic conditions, such as the ratio of different monomers and the contents of tetraethoxysilane (TEOS), c-methacryloxypropyltrimethoxysilane (Z-6030), diethanolamine (DAM) and ammonium persulfate (APS) on the physical mechanical properties of polyacrylate/silica nanoco...
متن کاملPreparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method
In this study, TiO2 nanoparticles have been synthesized by sol-gel method. Then, the effects of the different pHs, stirring times, surfactants (CTAB and Span 20) and temperatures on TiO2 nanoparticles were studied. The X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR), and transmission electron microscopy (TEM) analyses were used to characterize the samples. The obs...
متن کاملTHERMAL, MECHANICAL, AND MOISTURE ABSORPTION PROPERTIES OF WOOD-TiO2 COMPOSITES PREPARED BY A SOL-GEL PROCESS
Wood-TiO2 (titania) composites were prepared by a sol-gel process, in which wood was impregnated with the precursor solutions prepared from tetrabutyl titanate (TBT), followed by a curing step. The surface morphology and moisture absorption behavior of the wood composites, as well as their thermal and mechanical performances, were examined. Environmental scanning electron microscopy (ESEM) anal...
متن کاملPreparation and luminescent properties of Eu- doped BaTiO3 thin films by sol–gel process
Eu-doped BaTiO3 thin films with a pseudo-cubic perovskite structure were successfully fabricated on magnesia substrates at low temperature by using a high-concentration sol–gel process, in which the newly developed gel-aging process on substrate was employed. Film microstructure, crystallinity, sintering properties and photoluminescence (PL) were investigated. The xerogel thin films exhibited s...
متن کاملPreparation and Characterization of WO3 Electrochromic Films Obtained by the Sol-Gel Process
Tungsten trioxide (WO3) films have been coated on indium thin oxide (ITO) conductive glass substrate, using aqueous solution of peroxotungstic acid (PTA) by the sol-gel dip coating method. X-ray diffractometery (XRD) analysis confirmed monoclinic and triclinic structure for the film and powdered WO3 respectively. Fourier transforms infrared spectroscopy (FT-IR) exhibit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 2004
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.53.1287