Preparation and Optimization of Optical pH Sensor Based on Sol-Gel

Optical pH Sensor Based on Quinizarin for Alkaline pH Regions

The development of an optical pH sensor based on immobilization of quinizarin (1,4-dihydroxyanthraquinone) on a triacetylcellulose membrane was described. The resulting membrane exhibited fast color change from yellow to violet, while changing the pH in alkaline region. The immobilized quinizarin showed a broader dynamic range from (pH 9.4-11.4) with respect to free form (pH 8.8-10.4). The sens...

Plastic Optical Fiber pH Sensor Using a Sol-Gel Sensing Matrix

development of an optical sensor based on sol-gel doped with 2,6-dichlorophenol indophenol for analysis of ascorbic acid

in this work, an optical sensor for detection of ascorbic acid is described. the sensor is fabricated by casting and spin-coating silica sol-gel doped with 2,6-dichlorophenol indophenol on the glass plates. the sols are in turn obtained by acidic hydrolysis of various precursors such as tetraethoxysilane, triethoxymethylsilane and triethoxyoctylsilane in the presence of 2,6-dichlorophenol indop...

Sol-gel Preparation of Zirconium Oxide

INTRODUCTION A sol-gel preparation involves f m t the formation of a sol, which is a suspension of solid particles in a liquid, then of a gel, which is a diphasic material with a solid encapsulating a liquid. The liquid can be removed from a gel by either conventional drying (such as by using an oven) to obtain a plojiict kLown as e xercgel, or hy drying with supercritical extraction (often ref...

Optical Amplification and Photosensitivity in Sol-Gel Based Waveguides

The sol-gel process has emerged as an effective route for the fabrication of optical waveguides and guided wave devices and circuits. In particular, it is possible to incorporate active dopants like neodymium, erbium, and cesium for integrated optical active devices and circuits. In this paper, a review of recent research on active devices and circuits based on sol-gel process is made. Specific...