Preparation and Mechanical Properties of Continuous Carbon Nanotube Networks Modified Cf/SiC Composite

Fabrication and Mechanical Properties of Carbon Nanotube Composite Microtrusses

Metallic foams and periodic cellular structures have been investigated widely for energy absorption, thermal management, vibration damping, and structural load support applications [1, 2]. Periodic microtruss geometries, which comprise angled solid members that connect at node points, have been of interest because careful control of their geometry and periodicity [3-5] enables high stiffness, s...

Effect of multi-walled carbon nanotube on mechanical and rheological properties of silane modified EPDM rubber

A novel mixing approach for achieving a good dispersion of multi-walled carbon nanotubes (MWCNTs) in ethylene- propylene diene monomer (EPDM) matrix has been investigated. In this approach EPDM was modified with vinyltrimethoxysilane (VTMS) during melt mixing. In addition the effect of MWCNT concentration on mechanical and rheological properties of modified EPDM has been studied. The formulated...

determination of some physical and mechanical properties red bean

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

Mechanical Properties of Sharpened Carbon Nanotube Tips

Mechanical properties of carbon nanotube/polymer composites

The remarkable mechanical properties of carbon nanotubes, such as high elastic modulus and tensile strength, make them the most ideal and promising reinforcements in substantially enhancing the mechanical properties of resulting polymer/carbon nanotube composites. It is acknowledged that the mechanical properties of the composites are significantly influenced by interfacial interactions between...