Preparation and Gas Separation Properties of Polyphenylsulfone(PPSF)/Polyetherimide(PEI)/Silica Nanocomposite Membranes

Gas Separation Properties of Mixed Matrix Membranes based on Polyimide and Graphite Oxide

In this work, three different graphene-based materials, namely graphite oxide (GrO), thermally reduced graphite oxide (T-RGrO) and ascorbic acid multi-phase reduced graphene oxide (AMP-RGO), were synthesized and used to produce mixed matrix membranes (MMM) based on Matrimid®5218 for as separation. From the samples produced, a complete set of characterization was performed including XRD, FTIR, T...

Gas transport and separation with ceramic membranes. Part II. Synthesis and separation properties of microporous membranes

Non-supported microporous silica (amorphous) and titania thin films were made by the polymeric gel route. The titania system consisted of particles smaller than 5 nm. Reproducible modification of supported y-alumina films with silica demands a strict control of every modification step. Silica films of 3060 nm thickness on top of and presumably partly inside the y-alumina film were realised. The...

Fabrication and Evaluation of Functionalized Nano-titanium Dioxide (F-NanoTiO2)/ polysulfone (PSf) Nanocomposite Membranes for Gas Separation

Plasticization of gas separation membranes*

For the investigation of the plasticizing effect of carbon dioxide on polymers used for gas separation membranes new experimental methods have been developed that measure the sorption kinetics as well as the dilation kinetics. Comparing dilation and sorption kinetics at low and elevated pressures gives information about different types of swelling behaviour depending on the pressure level. Volu...

Polymeric Gas Separation Membranes: What Makes them Industrially more Attractive?