Preparation and characterization of SEBS-g-MAH-filled flexible polyurethane foam composites with gradient-changing structure
نویسندگان
چکیده
منابع مشابه
Characterization of Renewable PUF and Preparation of Polyurethane Foam Composites with Alkali Lignin/Renewable PUF
The renewable PUF was prepared by the alcoholysis of the used polyurethane foam composite and the polyurethane foam composite was also prepared by alkali lignin and renewable PUF. The renewable PUF was examined by GC-MS, the results showed the renewable PUF mainly consists of glycol, propanol and 1, 2-Benzenedicarboxylic acid, which can directly be used as the raw material of polyurethane foam ...
متن کاملModeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates
Flexible Polyurethane (PU) foam samples with different densities and chemical formulations were tested in quasi-static stress-strain compression tests. The compression tests were performed using the Lloyd LR5K Plus instrument at fixed compression strain rate of 0.033 s-1 and samples were compressed up to 70% compression strains. All foam samples were tested in the foam rise direction and their ...
متن کاملPreparation and Characterization of Structure and Corrosion Resistivity of Polyurethane /Montmorillonite/Cerium Nitrate Nanocomposites
In this study, nanocomposite coatings based on polyurethane cerium nitrate montmorillonite (MMT) were prepared, applied on carbon steel substrates, and investigated. The nanocomposite coatings were successfully prepared by the effective dispersing of nanoparticles in polyurethane resin by mechanical and sonication processes. The state of dispersion, dissolution, and incorporation were character...
متن کاملMulti-response Optimization of Grooved Circular Tubes Filled with Polyurethane Foam as Energy Absorber
The main objective of this research is to improvethe design and performance of the polyurethane foam-filled thin-walled aluminum grooved circular tubes using multi-response optimization (MRO) technique. The tubes are shaped with the inner and the outer circular grooves at different positions along the axis. For this aim, several numerical simulations using ABAQUS finite element explicit code ar...
متن کاملWaste Minimization Strategy: Flexible Polyurethane Foam Manufacture
Methylene chloride and CFCs are used as auxiliary blowing agents in the manufacture of flexible polyurethanefoams and are promptly emitted during the manufacturing processes.The concentrationof the auxiliary blowing agent are quite low due to the accepted practice of using large volumes of air to lower the ambient concentration of toxic isocyanates (a key chemical in the urethane reaction seque...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2019
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2019.108150