Preparation and Characterization of Nanocrystalline Cellulose using Ultrasonication Combined with a Microwave-assisted Pretreatment Process

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preparation and Characterization of Nanocrystalline Cellulose using Ultrasonication Combined with a Microwave-assisted Pretreatment Process

This study focuses on the extraction of nanocrystalline cellulose ( NCC) from the dried stalk of Corchorus olitorius, commonly known as jute, using a combination of a microwave-assisted alkaline peroxide pulping process (AHP) and ultrasonication. Dried jute stalk powder was pretreated using sodium hydroxide under microwave irradiation for the removal of lignin. The partially delignified sample ...

متن کامل

Isolation and characterization of cellulose nanofibers from bamboo using microwave liquefaction combined with chemical treatment and ultrasonication.

Cellulose nanofibers were successfully isolated from bamboo using microwave liquefaction combined with chemical treatment and ultrasonic nanofibrillation processes. The microwave liquefaction could eliminate almost all the lignin in bamboo, resulting in high cellulose content residues within 7min, and the cellulose enriched residues could be readily purified by subsequent chemical treatments wi...

متن کامل

Increasing yield of nanocrystalline cellulose preparation process by a cellulase pretreatment.

In this work the introduction of a cellulase treatment prior to NCC isolation was assessed. NCC was produced using sulfuric acid at two different concentrations (62 and 64% wt.). The effect of pore size for filtration step was also assessed. The smaller acid dose leaded to yields up to 65-70% and average size up to 160 nm. It also produced crystals with reduced sulfur content (0.6-1%). Cellulas...

متن کامل

chemical recycling of polycarbonate waste using conventional heating and microwave assisted method

پلی کربنات یکی از پلاستیکهای مهمی است که به صورت گسترده در تولید لوحهای فشرده، قطعات رایانه، مواد ساختمانی و غیره مورد استفاده قرار می گیرد. این پلیمر بصورت عمده از تراکم مونومر بیس فنولa (bpa) و کربنیل کلرید یا دی متیل کربنات ها بدست می آید. در سالهای اخیر بازیافت شیمیایی پلی کربنات بیشتر مورد توجه بوده است. بازیافت شیمیایی پلی کربنات برای بدست آوردن مواد اولیه آن با روشهای متفاوتی مانند تجزی...

Preparation and Characterization of Waterborne Polyurethane Modified by Nanocrystalline Cellulose

Nanocrystalline cellulose (NCC) was used as a modifier for waterborne polyurethane (WPU) to investigate the water and ethanol resistance of WPU-NCC composites. The NCC surface was modified with γ-glycidoxypropyltrimethoxysilane (GPTMS) and γammnonimpropylmethyldimethoxysilane (APMDS) to improve its compatibility with waterborne polyurethane (WPU), as indicated by the contact angle (CA). The cha...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: BioResources

سال: 2016

ISSN: 1930-2126

DOI: 10.15376/biores.11.2.3397-3415