Preparation and Characterization of Co-Mo Model Sulfide Catalysts for Hydrodesulfurization

preparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis

کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.

Sonochemical preparation of supported hydrodesulfurization catalysts.

Sonochemical preparation of Co and Ni promoted MoS(2) supported on alumina was achieved by high-intensity ultrasonic irradiation of isodurene solutions containing molybdenum carbonyl, dicobalt octacarbonyl, elemental sulfur, and Al(2)O(3) or Ni-Al(2)O(3) under Ar flow. The sonochemically prepared catalysts were characterized by elemental analysis, XPS, SEM, TEM, and XEDS, and hydrodesulfurizati...

Solid State Synthesis and Characterization of Model Hydrodesulfurization Catalysts

Solid-state reactions of elemental sulfur with metallic cobalt and molybdenum powders were used to synthesize model catalysts for hydrodesulfurization (HDS). The resulting materials had a general stoichiometry of CozlMo,-,S2 with x between 0.025 and 0.3. The solid phases formed during synthesis and after exposure to typical HDS reaction conditions were identified by X-ray diffraction and select...

Transition Metal Sulfide Catalysts for Petroleum Upgrading – Hydrodesulfurization Reactions

Sol-Gel Synthesis and Characterization of Co-Mo/Silica Catalysts for Single-Walled Carbon Nanotube Production

A series of silica-supported Co-Mo samples prepared by the sol-gel method has been compared as catalysts for the synthesis of single-walled carbon nanotubes (SWNT). The concentration ratio of ammonium hydroxide to the silica precursor tetraethoxysilane (TEOS) has an important effect on the resulting morphology of the silica support and, consequently, on the nature of the Co-Mo catalytic species...