PREPARATION AND CHARACTERIZATION OF BAMBOO NANOCRYSTALLINE CELLULOSE
نویسندگان
چکیده
منابع مشابه
Preparation and Characterization of Cellulose Nanocrystals from Bamboo Pulp
Cellulose nanocrystals (CNCs) can be obtained from bamboo pulp by hydrolysis with sulfuric acid. Firstly, the authors conducted a series of experiments under different conditions, and concluded that the optimal parameters were as follows: sulfuric acid concentration 60%, temperature 45 °C, the time is 90 minutes and the solid-liquid ratio is 1:8. Then, transmission electron microscopy (TEM), Fo...
متن کاملPreparation and Characterization of Waterborne Polyurethane Modified by Nanocrystalline Cellulose
Nanocrystalline cellulose (NCC) was used as a modifier for waterborne polyurethane (WPU) to investigate the water and ethanol resistance of WPU-NCC composites. The NCC surface was modified with γ-glycidoxypropyltrimethoxysilane (GPTMS) and γammnonimpropylmethyldimethoxysilane (APMDS) to improve its compatibility with waterborne polyurethane (WPU), as indicated by the contact angle (CA). The cha...
متن کاملPreparation and Characterization of Nanocrystalline Cellulose using Ultrasonication Combined with a Microwave-assisted Pretreatment Process
This study focuses on the extraction of nanocrystalline cellulose ( NCC) from the dried stalk of Corchorus olitorius, commonly known as jute, using a combination of a microwave-assisted alkaline peroxide pulping process (AHP) and ultrasonication. Dried jute stalk powder was pretreated using sodium hydroxide under microwave irradiation for the removal of lignin. The partially delignified sample ...
متن کاملPreparation Methods for Nanocrystalline Cellulose - Acid hydrolysis and various cellulose sources
The aim of this project has been to prepare nanocrystalline cellulose (CNC) from hydrochloric acid hydrolysis and optimise the process. CNC was also prepared from sulphuric acid hydrolysis to use as a reference. The starting material in both these processes was microcrystalline cellulose (MCC), therefore another cellulose source was used to try and prepare CNC from. The cellulose was extracted ...
متن کاملpreparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis
کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BioResources
سال: 2012
ISSN: 1930-2126
DOI: 10.15376/biores.7.2.1802-1812