Preliminary study on gas separation performance of flat sheet mixed matrix (PVDF/Zeolite)
نویسندگان
چکیده
منابع مشابه
Polyurethane Mixed Matrix Membranes for Gas Separation: A Systematic Study on Effect of SiO2/TiO2 Nanoparticles
In this study, the effect of SiO2 and TiO2 nanoparticles on the gas separation performance of the polyurethane (PU) membranes has investigated. Polyurethanes were synthesized by bulk two step polym...
متن کاملEffect of Different Additives on Separation Performance of Flat Sheet PVDF Membrane Contactor
This paper investigates effects of different additives on morphology and subsequently, separation performance of asymmetric flat sheet Polyvinylidene fluoride (PVDF) membranes to separate CO2 using membrane contractor. Five different additives from different chemical families including Lithium chloride (salt), Polyethylene glycol 400 (polymer), glycerol (weak anti-solvents), methanol...
متن کاملMathematical Modeling of Gas Separation in Flat-sheet Membrane Contactors
Gas-liquid membrane contactors offer several practical advantages including high surface area per unit volume; independent control of gas and liquid velocities without any flooding, loading, weeping, or foaming, pre-determined gas–liquid interfacial area, membrane modules, capability of linear scale-up; low corrosion problems, and low operation and capital costs. Two common types of membrane co...
متن کاملGas Separation Properties of Mixed Matrix Membranes based on Polyimide and Graphite Oxide
In this work, three different graphene-based materials, namely graphite oxide (GrO), thermally reduced graphite oxide (T-RGrO) and ascorbic acid multi-phase reduced graphene oxide (AMP-RGO), were synthesized and used to produce mixed matrix membranes (MMM) based on Matrimid®5218 for as separation. From the samples produced, a complete set of characterization was performed including XRD, FTIR, T...
متن کاملEffects of ZnO Nanoparticle on the Gas Separation Performance of Polyurethane Mixed Matrix Membrane
Polyurethane (PU)-ZnO mixed matrix membranes (MMM) were fabricated and characterized for gas separation. A thermogravimetric analysis (TGA), a scanning electron microscope (SEM) test and an atomic-force microscopy (AFM) revealed that the physical properties and thermal stability of the membranes were improved through filler loading. Hydrogen Bonding Index, obtained from the Fourier transform in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2018
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/342/1/012073