Preheating techniques to manufacture metallurgical coke.
نویسندگان
چکیده
منابع مشابه
The Use of Metallurgical Coke as Carburizing Material in the Foundry
Original scientific paper The properties of metallurgical cokes obtained in a laboratory from pure coal and with additives (light atmospheric residue of oil distillation and coal tar pitch) after heat treatment to 1600 °C were investigated. Changes in the basic characteristics (density, moisture, ash, metal and sulphur contents) were examined. Crystallographic parameters (crystallite size, Lc a...
متن کاملAdvances in Nde Techniques for Delayed Coke Drums
Delayed coke drums are operated under severe conditions of cyclic heating and forced cooling that apply repetitive thermal stresses to the drum walls. It has long been recognized that the ultimate failure mechanism for coke drums is weld cracking due to low cycle fatigue caused by these thermal stresses. It is also known that coke drums distort and bulge in service and that these bulges can be ...
متن کاملThe Use of Electron Microbeam Techniques in Metallurgical Analysis
Some idea of the possibilities of microbeam techniques can be illustrated by examining the following example of a run of mine gold ore sample. Milling and bulk chemical analysis of the ore will provide major and minor element analysis as well as the gold grade. More detailed chemistlY can also reveal the presence of trace elements that may be advantageous or deleterious to downstream processing...
متن کاملRestoring the sting to metric preheating
The relative growth of field and metric perturbations during preheating is sensitive to initial conditions set in the preceding inflationary phase. Recent work suggests this may protect super-Hubble metric perturbations from resonant amplification during preheating. We show that this possibility is fragile and sensitive to the specific form of the interactions between the inflaton and other fie...
متن کاملMonitoring techniques for the manufacture of tapered optical fibers.
The use of a range of optical techniques to monitor the process of fabricating optical fiber tapers is investigated. Thermal imaging was used to optimize the alignment of the optical system; the transmission spectrum of the fiber was monitored to confirm that the tapers had the required optical properties and the strain induced in the fiber during tapering was monitored using in-line optical fi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 1991
ISSN: 0915-1559
DOI: 10.2355/isijinternational.31.449