Preferential growth of perovskite BaTiO₃ thin films on Gd₃Ga₅O₁₂(100) and Y₃Fe₅O₁₂(100) oriented substrates by pulsed laser deposition

Epitaxial Structure of (001)- and (111)-Oriented Perovskite Ferrate Films Grown by Pulsed-Laser Deposition

The epitaxial structures of SrFeO(2.5) films grown on SrTiO(3) (001) and (111) substrates by PLD are reported. A layer-by-layer growth mode was achieved in the initial stage on both substrates. The films were stabilized with a monoclinic structure, where we identified the in-plane domain structures and orientation relationship. Our study presents a guide to control the heteroepitaxy of (111)-or...

Pulsed Laser Deposition of Hydroxyapatite Thin Films

Pulsed laser deposition of VO2 thin films

High quality vanadium dioxide ~VO2! thin films have been successfully deposited by pulsed laser deposition without postannealing on ~0001! and ~101̄0! sapphire substrates. X-ray diffraction reveals that the films are highly oriented with ~010! planes parallel to the surface of the substrate. VO2 thin films on ~0001! and ~101̄0! substrates show semiconductor to metal transistions with electrical r...

Investigation of Magnetite Thin-Films Produced by Pulsed Laser Deposition

Thin-films of magnetite, F@04 have been produced by the XeCl excimer laser ablation of both Fe304 and metallic Fe targets. The ablation of metallic Fe has been shown to produce about two orders of magnitude smaller concentration of boulders than the ablation of bulk magnetite. The use of single-crystal, latticematching substrates was found to be necessary at lower fluences (1 3 J cm-') for the ...

Pulsed laser deposition vs. matrix assisted pulsed laser evaporation for growth of biodegradable polymer thin films

Thin films of poly (lactide-co-glycolide) (PLGA), a biodegradable polymer, were deposited on Si wafers by both conventional pulsed laser deposition (PLD) and matrix assisted pulsed laser evaporation (MAPLE) using chloroform (CHCl3) as a matrix solvent. This research represents an initial study to investigate the deposition characteristics of each technique at comparable conditions to gain insig...