Predictive Models of Current, Voltage, and Power Losses on Electric Transmission Lines

A New Algorithm for Optimum Voltage and Reactive Power Control for Minimizing Transmission Lines Losses

Reactive power dispatch for voltage profile modification has been of interest Abstract to powerr utilities. Usually local bus voltages can be altered by changing generator voltages, reactive shunts, ULTC transformers and SVCs. Determination of optimum values for control parameters, however, is not simple for modern power system networks. Heuristic and rather intelligent algorithms have to be so...

Fault Location on Compensated Transmission Lines without Current Measurement

This paper presents a novel fault location method for series compensated transmission lines. It is established based on synchronized voltages sampling and Thevenin impedance from both ends of series compensated transmission line. The method is based on the use of phasor measurement units (PMU) technology which is aimed to be independent of current measurements, fault type, fault resistance, fau...

Investigation of Harmonic Current Source Effects on Distribution and Transmission Lines Capacity and Losses: Case Study

Recently, power quality (PQ) has because a significant issue for both power supplies and customers. Researchers in all developed countries know that power quality is one of the factors of losses in the network. Increasing power electronic equipment changes current waveform in distribution networks and this can cause many problems in networks. Distortion of voltage waveforms results in the appea...

Losses in Electric Power Systems

Improvement of DC Optimal Power Flow Problem Based on Nodal Approximation of Transmission Losses

This paper presents a method to improve the accuracy of DC Optimal Power Flow problem, based on evaluating some nodal shares of transmission losses, and illustrates its efficiency through comparing with the conventional DCOPF solution, as well as the full AC one. This method provides three main advantages, confirming its efficiency: 1- It results in such generation levels, line flows, and noda...