Prediction of the particle circulation rate in a draft tube spouted bed suspension dryer

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Prediction of Minimum Spout Velocity and Moisture Distribution of Ammonium Perchlorate Particles in a Spouted Bed Dryer

Ammonium perchlorate particles have been dried in a laboratory spouted bed dryer (screen-bottomed type) which is categorized as a fluidized bed dryer. The solid particles obtained in this process of drying were semi-porous and known as the group D of Geldart classification. The variations of moisture content with resident time, the effects of bed height on the pressure dro...

متن کامل

Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling

In the present work, the drying of calcium carbonate in a batch spouted bed dryer with inert particles has been investigated experimentally. The effect of several operating parameters including air temperature (90, 100, and 110 ˚C), air velocity (Ums, 1.2 Ums, and 1.5 Ums), and dry solid mass (5, 10, 20 g) has been studied. The Taguchi method has been applied to determine the optimal parameters...

متن کامل

Hydrodynamics And Heat Transfer Characteristics Of Draft Tube Spouted Bed Roasting Of Groundnuts (Arachis Hypogeae)

The hydrodynamic characteristics of flow regime were studied employing different draft tubes during the spouted bed roasting of groundnuts and the dimensionless parameters were employed for predicting the flow regime. The estimated Reynolds's number (Re) under the turbulent convection regime was ≈ 8399. The size of the draft tubes employed ranged from 0.175 to 0.375 m length and 0.065 m diamete...

متن کامل

prediction of minimum spout velocity and moisture distribution of ammonium perchlorate particles in a spouted bed dryer

ammonium perchlorate particles have been dried in a laboratory spouted bed dryer (screen-bottomed type) which is categorized as a fluidized bed dryer. the solid particles obtained in this process of drying were semi-porous and known as the group d of geldart classification. the variations of moisture content with resident time, the effects of bed height on the pressure drop, and the influence o...

متن کامل

Study of Pressure Drop in the 2D Spouted Bed with Conical Base of Binary Particle Mixtures: Effects of Particle Size and Density

In this study, the pressure drop for the binary mixtures of particles differing in size and density in a pseudo-2D spouted bed was experimentally studied. A binary mixture of solid particles including sand, Gypsum, and polyurethane was used in the experimental setup. Effects of static bed height, cone angle, particles diameter, and a particles weight fraction on the bed pressure drop were e...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of the Serbian Chemical Society

سال: 2006

ISSN: 0352-5139,1820-7421

DOI: 10.2298/jsc0604401a