منابع مشابه
prediction of ignition delay period in d.i diesel engines
a semi-empirical mathematical model for predicting physical part of ignition delay period in the combustion of direct - injection diesel engines with swirl is developed . this model based on a single droplet evaporation model . the governing equations , namely , equations of droplet motion , heat and mass transfer were solved simultaneously using a rung-kutta step by step unmerical method . the...
Effective Models for Prediction of Springback in Flanging
A study on the prediction of springback angle is presented, with focus on the straight flanging operation. The objective is to evaluate the reliability of different ways of prediction. An experiment of straight flanging operation is conducted. Major prediction approaches such as analytical model, numerical simulation using Finite Element Method (FEM) and Meshfree Method are discussed. A set of ...
متن کاملEffect of Computational Parameters on Springback Prediction by Numerical Simulation
Elastic recovery of the material, called springback, is one of the problems in sheet metal forming of drawpieces, especially with a complex shape. The springback can be influenced by various technological, geometrical, and material parameters. In this paper the results of experimental testing and numerical study are presented. The experiments are conducted on DC04 steel sheets, commonly used in...
متن کاملNumerical Product Design: Springback Prediction, Compensation and Optimization
Numerical simulations are being deployed widely for product design. However, the accuracy of the numerical tools is not yet always sufficiently accurate and reliable. This article focuses on the current state and recent developments in different stages of product design: springback prediction, springback compensation and optimization by Finite Element (FE) Analysis. To improve the springback pr...
متن کاملOn Springback Prediction With Special Reference To Constitutive Modeling
The springback phenomenon that occur in thin metal sheets after forming is mainly a stress driven problem, and the magnitude is roughly proportional to the ratio between the magnitude of the residual stresses after forming and Young’s modulus. An accurate prediction of residual stresses puts, however, high demands on the material modeling. A phenomenological plasticity model is made up of sever...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Metallurgica Sinica (English Letters)
سال: 2015
ISSN: 1006-7191,2194-1289
DOI: 10.1007/s40195-015-0355-0