Prediction of Residual Strength after Thermal Shock in Ceramics

Strength of Polycrystalline Ceramics under Shock Compression

Residual stress in ceramics with large thermal expansion anisotropy

Residual stress was measured in sintered and heat-treated Fe2TiO5 samples with various grain sizes. The influence of texturing was assessed by comparing the residual stress states of samples having randomly oriented grains and highly oriented grains produced through magnetically assisted processing. The residual stress was measured with x-ray diffraction using Cr Ka radiation. Due to the signif...

Understanding Nanoscale Thermal Conduction and Mechanical Strength Correlation In High Temperature Ceramics With Improved Thermal Shock Resistance For Aerospace Applications

Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this coll...

Effect of Thermal and Mechanical Aging on Flexural Strength of Zirkonzahn and Mamut Zirconia Ceramics

  Objective: Despite the high strength of zirconia restorations, aging in the oral environment and masticatory loading may result in transformation of tetragonal to monoclinic phase and decrease their strength. Statements in this regard are controversial. This study sought to compare the flexural strength (FS) of Zirkonzahn (ZirkonZahn, Cercon, Ceramill) and Mamut (Dubai Medical Equipment LLC, ...

Fracture toughness and thermal shock of tool and turbine ceramics

The behaviour of some commercial tool carbides and turbine ceramics has been investigated in regard to resistance to crack initiation, crack propagation and retained strength after thermal shock. New data are provided, particularly measurements of the fracture toughness of these materials at actual operating temperatures (up to 1200 ~ C). Many of the materials did not follow the generally accep...