Prediction of Pullout Resistance and Pullout Force-Displacement Relationship for Inextensible Grid Reinforcements
نویسندگان
چکیده
منابع مشابه
Experimental and FDM study on the effect of geogrid tensile strength on pullout resistance
This paper presents the effect of geogrid tensile strength by calculating pullout resistance and geogrid-soil interaction mechanism. In order to investigate this interface, a series of pullout tests have been conducted by large scale reformed direct shear test apparatus in both cohesive and granular soils. In numerical, finite difference software FLAC3D has been carried out on experimental test...
متن کاملPullout Capacity of Model Piles in Sand
A large scale experimental program using vertical and batter model piles in sand subjected to pull out loads has been carried out in a model tank of size 1m x 1m x 1m. Mild steel pipes of varying diameters, lengths, and shapes are used as model piles. A poorly graded river sand having specific gravity G= 2.67, Uniformity coefficient= 3.53, emax = 0.81, emin = 0.54 has been used as foundation me...
متن کاملPullout capacity of batter pile in sand
Many offshore structures are subjected to overturning moments due to wind load, wave pressure, and ship impacts. Also most of retaining walls are subjected to horizontal forces and bending moments, these forces are due to earth pressure. For foundations in such structures, usually a combination of vertical and batter piles is used. Little information is available in the literature about estimat...
متن کاملPullout strength of knotless suture anchors.
PURPOSE Suture anchors are used consistently for repairs of soft tissues, especially around the glenohumeral joint. These anchors can be used either arthroscopically or in an open procedure to anatomically restore the labrum and capsular tissues to the glenoid after avulsion injuries (Bankart lesion). The purpose of this study was to analyze the pullout strength of a new knotless suture anchor ...
متن کاملComparison and prediction of pullout strength of conical and cylindrical pedicle screws within synthetic bone
BACKGROUND This study was designed to derive the theoretical formulae to predict the pullout strength of pedicle screws with an inconstant outer and/or inner diameter distribution (conical screws). For the transpedicular fixation, one of the failure modes is the screw loosening from the vertebral bone. Hence, various kinds of pedicle screws have been evaluated to measure the pullout strength us...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Soils and Foundations
سال: 1996
ISSN: 0038-0806
DOI: 10.3208/sandf.36.4_11