Prediction of Optimum Welding parameters for Friction stir welding of Aluminium Alloy AA5083 Using Response Surface Method
نویسندگان
چکیده
منابع مشابه
Analysis and Comparison of Friction Stir Welding and Laser Assisted Friction Stir Welding of Aluminum Alloy
Friction Stir Welding (FSW) is a solid-state joining process; i.e., no melting occurs. The welding process is promoted by the rotation and translation of an axis-symmetric non-consumable tool along the weld centerline. Thus, the FSW process is performed at much lower temperatures than conventional fusion welding, nevertheless it has some disadvantages. Laser Assisted Friction Stir Welding (LAFS...
متن کاملOptimization of the parameters of low-carbon steel (EN10130) welding using friction stir welding method
Friction-stir welding process is a novel method of solid state welding, which produces heat due to friction between the pin, the shoulder and the workpiece. This heat causes a paste area. Shoulder pressure and pin spin cause edges integration and lead to welding. In this study, firstly, the feasibility of welding of steel sheet (EN10130) with a thickness of 1.5mm has been tested by 58 experim...
متن کاملoptimization of the parameters of low-carbon steel (en10130) welding using friction stir welding method
friction-stir welding process is a novel method of solid state welding, which produces heat due to friction between the pin, the shoulder and the workpiece. this heat causes a paste area. shoulder pressure and pin spin cause edges integration and lead to welding. in this study, firstly, the feasibility of welding of steel sheet (en10130) with a thickness of 1.5mm has been tested by 58 experimen...
متن کاملWelding Parameter Optimization of Alloy Material by Friction Stir Welding using Taguchi Approach
Friction stir welding is used as a solid state joining process for soft materials such as aluminium alloys and also for hard materials like steels. It avoids many of the common problems obtained in fusion welding. In mechanical, civil, automobile, naval, and aeronautical engineering beams are widely used of the magnesium alloys for different applications and that are joined by conventional iner...
متن کاملTool Geometry for Friction Stir Welding—Optimum Shoulder Diameter
The most important geometric parameter in the friction stir welding (FSW) tool design is the shoulder diameter, which is currently estimated by trial and error. Here, we report a combined experimental and theoretical investigation on the influence of shoulder diameter on thermal cycles, peak temperatures, power requirements, and torque during FSW of AA7075-T6. An optimum tool shoulder diameter ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2020
ISSN: 1757-899X
DOI: 10.1088/1757-899x/912/3/032030