Prediction of Fatigue Life for CFRP/Metal Bolted Joint under Temperature Conditions
نویسندگان
چکیده
منابع مشابه
Fatigue Life Prediction of Rivet Joints
Strength reduction in structures like an aircraft could be resulted as cyclic loads over a period of time and is an important factor for structural life prediction. Service loads are emphasized at the regions of stress concentration, mostly at the connection of components. The initial flaw prompting the service life was expected by using the Equivalent Initial Flaw Size (EIFS) which has been re...
متن کاملFatigue Behavior and Life Prediction Model of a Nickel-Base Superalloy under Different Strain Conditions
The fatigue behavior of a nickel-base superalloy was investigated under total strain-controlled mode at high temperature. The fatigue life, cyclic stress response behavior and hysteresis loop of the superalloy were investigated under isothermal low cycle fatigue (LCF) conditions. The superalloy exhibited cyclic hardening and softening behaviors during the process of fatigue loading. The hystere...
متن کاملImproved Method of Rolling Bearing Fatigue Life Prediction Under Edge Loading Conditions
More than half a century has passed since Lundberg and Palmgren (referred to as LP in the following) established a theory on the life of rolling bearings 1) 2), and problems with the theory such as its lack of capability of considering shear force (tangential force) on the surface caused by slip or the initial or residual stress due to fit have been pointed out, with correction to these problem...
متن کاملRecent Advances in Bolted composite Joint Strength Prediction
AMPTIAC Directory ... 15 The beginning In late 1993, the Mechanics and Surface Interactions Branch of the Air Force Research Laboratory’s Materials Directorate (AFRL/MLBM) was tasked to investigate the accuracy of the analysis methods used to predict the strength of bolted composite joints used on high-performance fighter aircraft such as the F-22 Raptor. The strength of bolted joints is essent...
متن کاملProbability Approach for Prediction of Pitting Corrosion Fatigue Life of Custom 450 Steel
In this study, the pitting type of corrosion growth characteristics, fatigue crack initiation and propagation behavior; axial fatigue tests were carried out on precipitation hardened martensitic Custom 450 steel in the air and 3.5wt% NaCl solution. Using the ratio of the depth to the half-width of the pits; (a/c)= 1.5±0.2 the corrosion pit depth growth law was obtained as a function of stress a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME International Journal Series A
سال: 2003
ISSN: 1344-7912,1347-5363
DOI: 10.1299/jsmea.46.484