Prediction of Capacity for Moment Redistribution in FRP-Strengthened Continuous RC T-Beams
نویسندگان
چکیده
منابع مشابه
Strut-and-Tie Method for Prediction of Ultimate Shear Capacity of Shear-Strengthened RC deep beams with FRP
The main objective of this study is to propose the Strut-and-Tie method (STM) to predict the shear capacity of simply supported RC deep beams shear-strengthened with carbon fiber reinforced polymers (CFRP). It is assumed that, the total carried shear force by shear-strengthened RC deep beam provided by three independent resistance, namely diagonal concrete strut due to Strut-and-tie mechanism, ...
متن کاملCapacity Assessment of Gld Rc Frames Strengthened with Frp
Many gravity load designed (GLD) reinforced concrete (RC) frames are nowadays located in seismic areas. Different strengthening methodologies have been proposed in the past; an innovative technique based on the use of composites was proposed and validated by an experimental program developed at University of Missouri-Rolla. A theoretical approach for the assessment of the subassemblage capacity...
متن کاملnumerical and sensitivity analysis of rc beams strengthened with frp
in this paper, using numerical methods and test results, the behavior of reinforced concrete beams strengthened with fiber-reinforced polymers (frp) is investigated. in the numerical analysis, the concrete damaged plasticity model is used for considering the nonlinear behavior and strain softening of concrete. the abaqus finite element program is utilized for the analysis of 12 flexural beams s...
متن کاملFlexural Capacity of Rc Beams Strengthened with Srp and Srg
The use of externally bonded Steel-Reinforced Polymer (SRP) and Steel Reinforced Grout (SRG) composites is a promising new technology for increasing the flexural and shear capacities of reinforced concrete (RC) members. The reinforcement system in these composites is a sheet made up of unidirectional cords consisting of tightly wound ultra high strength steel wires. The reinforcement can be mol...
متن کاملEffect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites
Debonding failure is the main failure mode in flexurally strengthened reinforced concrete beams by externally bonded or near surface mounted fibre reinforced polymer (FRP) composites. It is believed that FRP debonding will be initiated if the shear stress on the concrete-FRP interface reaches the tensile strength of concrete. However, it was found through experimental and analytical studies tha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Composites for Construction
سال: 2017
ISSN: 1090-0268,1943-5614
DOI: 10.1061/(asce)cc.1943-5614.0000719