Prediction of blast furnace hearth condition: part I – a steady state simulation of hearth condition during normal operation
نویسندگان
چکیده
منابع مشابه
Technological Indicators of Operation of the Rotating-hearth Furnace in Conditions of Discontinued Production
The technological process for manufacturing seamless steel tubes in the Sisak Rolling Mill includes the heating of the charge for processing in the hearth-rotating furnace. Description of the furnace and its operation can be found in literature 1 . In the process currently applied for producing the tubes with the outer diameter of 168.3–356.6 mm the temperature is between 1280 and 1300 °C 2 . T...
متن کاملToward an Improvement of Natural Gas-diesel Dual Fuel Engine Operation at Part Load Condition by Detail CFD Simulation
Natural gas-diesel dual fuel combustion is a beneficial strategy for achieving high efficient and low emissions operation in compression ignition engines, especially in genset application heavy duty diesel engine at rated power. This study aims to investigate a dual fuel engine performance and emissions using premixed natural gas and early direct injection of diesel fuel. Due to the different r...
متن کاملIzapa: Cultural Hearth of the Olmecs?
Located near the edge of the Pacific coastal plain in the far southeastern corner of Chiapas, Mexico, is the large pre-Columbian ceremonial center known as Izapa. Situated on the terrace of a small stream tributary to the Rio Suchiate, the border river between Mexico and Guatemala, the site consists of more than 130 mounds sprawled over several hectares of lush tropical lowland at the base of t...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Immersion Pyrometry and Open Hearth Furnace Productivity FASTER STEELMAKING AT RAVENSCRAIG
It is nowadays generally accepted that controlling the tapping temperature of steel by immersion pyrometry is an important means of improving steel quality. Broadly speaking, if the steel is too hot when tapped the ingots tend to crack, and if too cool they tend to suffer from “shell” on the surface and non-metallic inclusions beneath. From this point of view it is now simply a question of esta...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ironmaking & Steelmaking
سال: 2019
ISSN: 0301-9233,1743-2812
DOI: 10.1080/03019233.2018.1561385