Prediction of bending rigidity for laminated fabric with adhesive interlining by a laminate model considering tensile and in-plane compressive moduli

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

New Micromechanical Model for Predicting Biaxial Tensile Moduli of Plain Weave Fabric Composites

New Micromechanical Model for Predicting Biaxial Tensile Moduli of Plain Weave Fabric Composites J B Bai, J J Xiong*, Q Wang School of Transportation Science and Engineering, Beihang University, Beijing, 100191, People’s Republic of China (*, corresponding author: [email protected]) Abstract: This paper addresses a new micromechanical model to predict biaxial tensile moduli of plain weave fab...

متن کامل

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

The effects of unequal compressive/tensile moduli of composites

This paper investigates the effects of unequal compressive and tensile moduli of carbon fibre reinforced plastic (CFRP) composites. The basic assumption is based on the statistics that the compressive modulus is a fraction lower than the tensile modulus. Data evaluated by Finite Element Analysis (FEA) model, Classical Laminate Theory (CLT) model, and experiment are used to investigate these eff...

متن کامل

A Micromechanics Based Finite Element Model for the Prediction of Compressive Failure in Notched Laminated Composites

A micromechanics based analysis to predict damage initiation in compressively loaded symmetric notched multiply laminates at efevated temperature under remote biaxial loading is described. The finite element method in conjunction with the commercial code ABAQUS® is used to solve the governing system of equations. The results obtained for the predictions are compared against a set of experimenta...

متن کامل

the innovation of a statistical model to estimate dependable rainfall (dr) and develop it for determination and classification of drought and wet years of iran

آب حاصل از بارش منبع تأمین نیازهای بی شمار جانداران به ویژه انسان است و هرگونه کاهش در کم و کیف آن مستقیماً حیات موجودات زنده را تحت تأثیر منفی قرار می دهد. نوسان سال به سال بارش از ویژگی های اساسی و بسیار مهم بارش های سالانه ایران محسوب می شود که آثار زیان بار آن در تمام عرصه های اقتصادی، اجتماعی و حتی سیاسی- امنیتی به نحوی منعکس می شود. چون میزان آب ناشی از بارش یکی از مولفه های اصلی برنامه ...

15 صفحه اول

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Textile Research Journal

سال: 2012

ISSN: 0040-5175,1746-7748

DOI: 10.1177/0040517511420764