Prediction methods of fatigue critical point for notched components under multiaxial fatigue loading

Prediction of Fatigue Life in Notched Specimens Using Multiaxial Fatigue Criteria

In this research, the effects of notch shape on the fatigue strength of 2024-T3 aluminum alloy notched specimens have been studied using experimental and multiaxial fatigue analysis. For this purpose, four set of specimens with different notch shape were prepared and then fatigue tests were carried out at various cyclic longitudinal load levels. Load controlled fatigue tests of mentioned specim...

Inverse first-order reliability method for probabilistic fatigue life prediction of composite laminates under multiaxial loading

Inverse first-order reliability method for probabilistic fatigue life prediction of composite laminates under multiaxial loading Yibing Xiang and Yongming Liu* Department of Civil and Environmental Engineering Clarkson University Potsdam NY.13699, USA Abstract: Multiaxial fatigue reliability is a challenging problem despite extensive progress made during the past few decades. Anisotropic materi...

Assessment of different methods for fatigue life prediction of steel in rotating bending and axial loading

Generally, fatigue failure in an element happens at the notch on a surface where the stress level rises because of the stress concentration effect. The present paper investigates the effect of a notch on the fatigue life of the HSLA100 (­high strength low alloy) steel which is widely applicable in the marine industry. Tensile test was conducted on specimens and mechanical properties were obtain...

Thermomechanical Fatigue Life Prediction of Notched

Assessment of the Existing Models to Estimate the Fatigue Life under both Multiaxial in Phase and 90° Out of Phase Loading Conditions

Engineers have a range of methods to estimate the fatigue life under multiaxial conditions. Each of these predictive methods is generally subjected to restrictions, related to the inherent simplified assumptions. The objective of this paper is to evaluate the validity of commonly used multiaxial fatigue criteria for different multiaxial loading conditions. The best criterion is identified throu...