Prediction Method of Fracture Toughness KIC Transition Curve from Charpy V-Notch Impact Test Results.
نویسندگان
چکیده
منابع مشابه
The Effect of Microstructure on Estimation of the Fracture Toughness (KIC) Rotor Steel Using Charpy Absorbed Energy (CVN)
The proportional relationships between the Charpy absorbed energy (CVN) and the KIC values have been established for a wide variety of steels. Several formulae have been proposed that predict KIC from CVN. The purpose of this study is to investigate, by means of compact testing fracture toughness specimens, the effective role of microstructure for estimation of the fractur...
متن کاملA NOVEL PROCEDURE FOR MEASURING THE IMPACT FRACTURE TOUGHNESS KId WITH PRECRACKED CHARPY SPECIMENS
A procedure i s presented f o r determining the impact f r a c t u r e toughness K w i t h precracked Charpy specimens wi thout performing any load measurements.'?he Kid-val ue i s obtained from preestabl ished impact response curves and a measurement o f t h e t ime-to-fracture. The measuring technique i s f u l l y dynamic and does not impose any r e s t r i c t i o n s on t h e t e s t condi...
متن کاملPrediction of Mode II of Fracture Toughness in Laminate Composites
In this paper, effects of ply orientation of adjacent plies with (ϕ//θ) interfaces on mode II critical strain energy release rate (fracture toughness) of multidirectional (MD) laminate has been studied. Ply orientation of adjacent plies is one of the most important parameters affects the mode II critical strain energy release rate () in the initiation of the delamination. To study this paramet...
متن کاملCharpy Notch Toughness and Hardness of Reheated Martensite and Lower Bainite
The resistance to hydrogen embrittlement is of essential importance for steels for vessels for storage of hydrocarbons and depends on the effect of absorbed hydrogen on steel ductility. API tests have shown for the 490 MPa yield stress HSLA steels with the microstructure of ferrite and cementite particles a much greater reduction of area than for the 350 MPa steel with the microstructure of pol...
متن کاملEffect of welding on impact toughness of butt-joints in a titanium alloy
Impact toughness of a gas tungsten arc welded Ti /6Al /4V alloy butt-joint was evaluated at room temperature using standard Charpy V-notch specimens. The Charpy specimens were prepared with notch roots located either in the parent metal, in the heataffected zone (HAZ), or in the weld metal. Optical metallography and Vickers microhardness test showed that the weld metal has the coarsest grains a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1992
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.41.1241