Prediction and Experimental Testing of Spherical Milling Media Wear Rate
نویسندگان
چکیده
منابع مشابه
WEAR RATE PREDICTION OF GRINDING MEDIA USING BPNN AND MLR MODELS IN GRINDING OF SULPHIDE ORES
Nowadays steel balls wear is a major problem in mineral processing industries and forms a significant part of the grinding cost. Different factors are effective on balls wear. It is needed to find models which are capable to estimate wear rate from these factors. In this paper a back propagation neural network (BPNN) and multiple linear regression (MLR) method have been used to predict wear rat...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Prediction a of Tribocorrosion Wear Rate (RESEARCH NOTE)
Basic properties of the suggested phenomenological model of tribocorrosion wear are considered. Using a friction pair austenitic stainless steel-ceramic in acid electrolytes as an example, a good agreement between predicted data and experimental evidence was obtained.
متن کاملHybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data
Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC) in combi...
متن کاملPrediction of Tool Wear and Tool Life with Condition Monitoring System on End Milling of EN31
This paper describes the tool life prediction model with end milling EN31 tool steel using P30 Tungsten uncoated carbide tool. The data set from the Taguchi method design is taken. For discussion the effects of cutting speed, feed rate and depth of cut on tool life of P30 are considered. This paper suggests a novel technique for the tool wear measurement based on machine vision. Tool images are...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2005
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.46.2036